Extron electronic DVS 304 D, DVS 304 AD manual Setting up the DVS to work with a Matrix switcher

Setting up the DVS to work with a Matrix switcher

The Sync to Matrix tool is a powerful tool which can simplify the control system necessary when using an Extron Matrix switcher and a DVS 304.

The “Sync to Matrix” script can sense when a new tie is made on the matrix is routed to the DVS and automatically recalls the input preset associated with the input on the matrix switcher. The input preset recalls all the settings for the input including the signal format, input sampling settings, and picture controls.

Extron

CrossPoint 300 84 HV

Matrix Switcher

LAN

Extron

DVS 304

Digital Video Scaler

Extron

DVS 304

DVD/VCR Digital Video Scaler

Display

AV Tuner Camera Display

HD Tuner

Extron

RGB 109xi

Interface

Document

Camera

PC

Figure 2-23 — DVS 304 devices connected to a Matrix switcher

To configure the input presets required using the Sync to Matrix tool, do the following:

1. Install and connect the DVS as described in the Quick Start Guide, with the exception of step 3. In place of this step, connect the DVS 304’s input #4 to one of the matrix switchers outputs.

NMultiple DVS 304’s can be connected to a single matrix switcher.

2. On the matrix switcher, tie input 1 to the output connected to input 4 on the DVS (see figure 2-24). Refer to the matrix switchers users manual for method.

DVS 304 • Installation and Operation 2-25