Extron electronic DVS 304 D Audio configuration DVS 304 a and DVS 304 AD only, Memory preset

Installation and Operation, cont’d

Audio configuration (DVS 304 A and DVS 304 AD only)

Audio Configuration allows the input level to be adjusted between –15 dB to +9 dB for each audio input.

OUTPUT

CONFIG

MENU
AUDIO	NEXT
CONFIG
(audio models only)

IN1 LEVEL 0dB

NEXT

Input level Adjust the input gain/attenuation from -15dB to +9dB of the selected input.

Figure 2-14 — Audio configuration menu

Volume control is available through SIS commands or IR remote control.

Memory preset

The memory preset feature saves the current values for image parameters such as color, tint, contrast, brightness, detail, aspect ratio, horizontal start, vertical start, horizontal active, vertical active, phase, total pixels, horizontal position, vertical position, horizontal size, vertical size and zoom.

The following flowchart provides an overview of the Memory Preset submenus and the options for each setting.

Figure 2-15 — Memory present menu

NThe presets will only save the sizing, centering, and picture control information.

Save memory preset

From this submenu, the picture control information for the currently selected input can be saved to memory. Up to three memory presets can be saved per input.

1.	Using either the Adjust horizontal ([) or Adjust vertical ({) knob, select (< >)
	either N/A, 1, 2, or 3 to select a preset. The default is <N/A>.
2.	To save the preset, press the Next button.

NThe presets are saved in nonvolatile memory, so powering down the DVS 304 will not lose the presets. Saving a preset by pressing the Next button will also advance to the next submenu (Clear memory preset).

To exit the Save memory preset function without saving a preset, press Menu.

2-16 DVS 304 • Installation and Operation