
Presets page
The Presets page (located under the Control tab, figure
Figure 4-9 — Presets page
Memory presets
To create a memory preset, do the following:
1.Click the User Control link on the left side of the page. The User Control page appears (figure
2.Click the button for the input (inputs 1, 2, or 3) you would like to preset.
3.Make changes to the attributes (e.g., aspect ratio, zoom, brightness, etc.) of your chosen input and press Enter.
4.Click the Presets link on the left side of the page. The Presets page appears (figure
5.Use the
6.Click the Save button.
To return to a preset created after other changes were made, click the Recall button under the preset number. The preset attributes are restored.
Input presets (input 4 only)
To create a input preset, do the following:
1.From the Configuration tab, click the Scaler Setting link at the left of the page.
2.Select the desired input format for input 4.
3.Click the User Control link on the left side of the page. The User Control page appears (figure
4.Click the button for the input 4.
5.Make changes to the picture control settings (e.g., aspect ratio, zoom, brightness, etc.). You can also create OSD text that is saved as part of the preset. This name can identify the device connected to this input for easy reference (e.g., DVD, VCR, etc.).
6.Click the Presets link on the left side of the page. The Presets page appears (figure
7.Use the
8.Click Save. The OSD text you created for the preset appears along with the preset number.
To return to a preset created after other changes were made, click the Recall button under the preset name/number. The preset attributes are restored and the OSD text appears on the top left corner for a time specified by the OSD duration setting.
To determine how long the OSD text appears on the screen, click the Scaler Settings link under the Configuration tab (figure
DVS 304 • Ethernet Control |