Extron electronic DVS 304 AD, DVS 304 D manual PIP Setup, Audio DVS 304 a only

Ethernet Control, cont’d

PIP Setup page

The PIP Setup page (located under the Control tab, figure 4-10), allows easy, remote access to the picture in picture option of the DVS 304 series.

Figure 4-10 — PIP Setup page

To use this feature, do the following:

1.Click the User Control link on the left side of the page. The User Control page appears (figure 4-8).

2.Click the button for the input containing the main image source.

3.Click the PIP Setup link on the left side of the page. The PIP Setup page appears (figure 4-10).

4.Use the drop-down menu to set the size of the subordinate (PIP) picture.

5.Use the drop-down menu to choose the appropriate PIP input

(See chapter 2, Installation and Operation, for information on PIP window selection). The attributes window for the PIP appears, as shown below.

Figure 4-11 — PIP “On”

6.Once the PIP window is selected, its picture control settings are available on the PIP Setup page. (figure 4-10).

NWhen PIP is activated, the adjustments under the User Control page are also applied to the PIP window.

7.Define the attributes for the PIP.

Use the Swap button to exchange the size and position of the main and PIP windows.

Audio (DVS 304 A only)

Use the Audio Follows radio button, shown right, to assign audio to either the main image or the PIP image.

4-12 DVS 304 • Ethernet Control