Gateway IP Address

The default address is 192.168.254.254, but if this conflicts with other equipment at your installation, you can change the IP address to any valid value.

NEditing the Extron IP address while connected via the Ethernet port can im- mediately disconnect the user from the scaler. Extron recommends editing this field using the RS-232 link and protecting the Ethernet access to this screen by assigning an administrator’s password to qualified and knowledgeable person- nel only.

Edit this field as follows:

1.	Click in the DVS 304 IP address field. The graphic cursor becomes a text
	cursor.
2.	Edit the address as desired.
3.	Press the Tab key on the keyboard or click in another field to exit the IP
	Address field.
4.	Click on the Submit button to make the address change take affect.

The Gateway IP Address field identifies the address of the gateway to the mail server to be used if the DVS 304 and the mail server are not on the same subnet.

The gateway IP address has the same validity rules as the system IP address.

Subnet Mask field

The Subnet Mask field is used to determine whether the DVS 304 is on the same subnet as the controlling PC or the mail server when you are subnetting.

Date/Time Settings fields

The Date/Time Settings fields (figure 4-3) provide a location for viewing and setting the time functions. The adjustable variables are month, day, year, hours, minutes, AM/PM, and (time) zone.

Change the date and time settings as follows:

1.	Click the desired variable’s drop box. A drop down scroll box appears.
2.	Click the desired value.

NFor quick setting of the date and time, click the Local Date/Time.

	Click Cancel at any point before submitting to exit any field changes.
	The unit is not updated with those changes The screen refreshes and shows the
	current device settings.
3.	Repeat steps 1 and 2 for all variables that need to be changed.
4.	If appropriate, select the Daylight Savings radio button for the DVS’s region,
	to turn on the daylight savings time feature.

NWhen a locations daylight savings time is turned on, the switcher automatically updates its internal clock between Standard Time and Daylight Savings Time in the spring and fall on the date that the time change occurs in the country or region selected. When Daylight Savings Time is turned off, the switcher does not adjust its time reference.

5.Select the Zone variable that is relevant for the DVS’s location.

NThe Zone field identifies the standard time zone selected and displays the amount of time, in hours and minutes, that the local time varies from the GMT international time reference.

5. Click Submit. The device is updated with the new settings.

DVS 304 • Ethernet Control

4-5