Installation Instructions
STORAGE TANK AND STARTUP
STORAGE TANK INSTALLATION
1. Remove the protective cap from the top of the tank.
2. Apply | Thread |
|
| |
of thread tape, | ||||
tape | ||||
in a clockwise | ||||
|
|
| ||
direction, to the |
|
|
| |
tank threads. |
|
|
| |
|
|
| ||
3.Install the
Storage
tank
4.Push the 3/8″ red banded tubing from the Reverse Osmosis System into the fitting on the storage tank.
SYSTEM STARTUP PROCEDURE
CAUTION: If installing the unit in new construction, ensure that house plumbing is flushed thoroughly before opening the water supply valve.
1.Check that all tubing connections are secure.
2.Turn on the Feed Water Supply Valve.
3.Check all connection points for leaks.
4.Follow the Sanitization procedures on page 19.
5.After sanitization is complete, reinstall prefilter, postfilter and Reverse Osmosis cartridges.
6.Membrane contains a food grade preservative. Allow the system to fill the tank, then drain it completely four times before using the water from the system.
7.Recheck all water connection points a few days later to check for small leaks.
17