Programming functions
Changing program parameters
The factory settings for various parameters are listed in the "Program Guide".
Program parameters cannot be changed unless they are activated within a given program (see "Program Guide".
It is important to document any changes e.g., by recording them in the corresponding column in the program guide.
Changing the wash and rinse parameters
The wash programs can be adjusted to meet various technical requirements. For example, the temperatures and cycle times for the program blocks Main Wash 1 and Main Wash 2, and Rinse 1 and Rinse 2, can be changed.
Available temperature range:
30 °C - 93 °C in all programs except "Rinse", "Drain" and "Special".
Available time range: 1 - 15 min.
Changing the drying parameters
The drying parameters within the various wash programs can be adjusted to meet specific requirements. For example, the temperatures and drying times within the program blocks Drying 1 (if available) and 2 can be changed.
Available temperature range: 50 °C - 99 °C
Available drying time range for: Drying 1: 1 - 99 min in 1 min increments
Drying 2: 5 - 95 min in 5 min increments
The drying time in the Drying 2 program block can also be changed by using the 0 button (see "Selecting the drying function").
40