Burner
Before using for the first time, take heed of the “Warning and Safety Instructions”.
Burner control
The inner and outer burner are both controlled by one knob.
The burner control knob may only be turned
/Simmer setting (inner ring on low, outer ring off)
The gas flame is lit by electrical ignition. When the burner control is pressed in the strong flame position, a spark passes from the electrode to the burner and ignites the gas to give a flame (see page 11).
The burner is equipped with an ignition safety device. If a gas flame goes out, for example, if food boiled over, or if there was a sudden draft, the ignition safety control cuts off the supply of gas in a maximum of 90 seconds.
Instructions for using the gas burner
The flame strength can be selected:
XGas switched off
&Strong flame (outer and inner rings both produce high flames)
&Low flame (outer ring on low, inner ring on high)
&Intermediate state b (provides ignition for outer ring from inner ring)
/Very low flame (inner ring on high, outer ring off)
Place the wok or the pan on the wok/pan support.
A trivet is supplied with the gas cook- top. It is designed to sit on the wok/ pan support when using small pans. The trivet should only be used on the burner with a simmer setting. It should only be used with pans with a diameter of less than 4" (10 cm).
11