]öConversion to alternative types of gas
Changing the small jets
Natural gas
Liquid gas
Changing the main jet, (does not apply to conversion to Natural Gas).
Using a 10 and 13 mm wrench, loosen the main jets from their holders. Use a 13 mm wrench to counterhold.
Screw in the new main jet, once again using the wrench to counterhold.
bSmall jet with smaller orifice (e. g. for propane gas: 0.25)
cSmall jet with larger orifice (e. g. for propane gas: 0.54)
Using a small screwdriver, unscrew both small jets in the gas fitting.
Pull the jets out with a pair of pliers, install the correct jets and secure. Tighten to the bottom.
Do not use this screw “to adjust” the small flame.
Save orifices removed from the appliance for future use.
34