Miele KM 81-2 operating instructions

Page 8

Warning and Safety Instructions

Check that all the burners are cor- rectly assembled before igniting

the gas, otherwise the ignition could malfunction.

Please note the following, in case unit is on LPG supply:

Where this appliance is installed in marine craft or in caravans, it shall not be used as a space heater.

Wall sealing strips must be heat- resistant and any backmoulding

must be of heat resistant material.

The minimum clearances (USA/CDN):

from adjacent combustible construc- tion – 10" (250 mm),

between appliance and rear wall or front of backsplash – 90 mm (CDN) or 3 1/2" (USA),

between appliance and overhead combustible construction

– 30" (760 mm) or

65 cm (26") between the cooktop and a cooker hood above it, between appliance and front edge of countertop – 2 1/4" (55 mm), depth of overhead cabinets must not exceed – 13" (330 mm),

between combustible constructions and the extending cooking surface

– 460 mm (Canada).

The minimum clearances (AUS/NZ):

When installing the gas cooktop, the following minimum dimensions

must be kept.:

See "Clearance above and around the appliance" (pages 27 – 31),

60 cm between the cooktop and a cooker hood above it.

Leave these instructions with the consumer.

Important notes for the user

For safety reasons, this cooktop should only be installed as a built-

in appliance.

Do not let small children use the appliance or touch it during oper-

ation. Not only do the cooking areas heat up, but also the control panel. Danger of burning. Keep all pans out of the reach of children. Supervise use of the cooktop by the elderly or infirm.

8

Image 8
Contents @äö Description of the appliance Data plate Stainless steel cover-EAContents For your safety For Canada onlyDisposal of your old machine Help protect our environmentDisposal of packaging Important safety instructions Important notes for the installerPage Page Save the Instructions Burner Burner controlPower cut Material Shape of woks, pots and pansWok / Pan base LidsElectronic ignition Cleaning and careBurner caps Control panel / Control knob Wok/pan support, trivetCooktop surface Problem solving guide Shape and color of the flame are different from usual?Gas flame goes out after being lit? Electric spark ignition for the gas burner no longer works?After Sales Service Technical data CDN / USA ÖElectrical connectionTechnical data AUS NZ @äElectrical connectionElectrical connection AUS Electrical connection NZÖGas connection For USA only Pressure regulator For CDN onlyNominal rating for all types of gas USA/CDN Nominal rating for all types of gas at the high setting @äGas connectionAppliance dimensions Gas connection CDN/USA Gas connection AUS/NZ ÖInstructions for building-in Zone Combiset Place the seal provided f under the edge of the cooktop @äClearance above and around the appliance @äClearance above and around the appliance Data plate details @äInstallationInstallation @äInstallation @äInstructions for building-in ÖConversion to alternative types of gas Reference table jet sizesNatural gas Liquid gas ÖConversion to alternative types of gas After conversion Conversion @äConversion to alternative types of gasRemarks Natural gas Liquid gas @äConversion to alternative types of gas After conversion Page Page Page Alteration rights reserved / 22