Miele KM 81-2 Wok/pan support, trivet, Cooktop surface, Control panel / Control knob

Page 15

Cleaning and care

Wok/pan support, trivet

Caution: the wok/pan support and trivet become hot in use.

The wok/pan support and trivet can be removed for cleaning.

The wok/pan support and trivet can be cleaned in a hot solution of dishwash- ing liquid.

Never use scouring agents as these could scratch the surface.

Dry with a cloth.

Cooktop surface

Avoid allowing liquids or foods con- taining salt to spill on to the stain- less steel cooktop. Should this hap- pen, wipe up any spillages immediately.

Otherwise discoloration could occur.

Remove dust, oils and fats, spillages of foods and condensed water from pots and pans immediately to prevent it from drying on. Dried on food residues are easier to remove if they are first soft- ened with warm water.

Clean the cooktop surface using hot water with a little dishwashing liquid.

Do not use any scouring agents or pads, knives or hard brushes. These will cause scratching.

Do not use cleaning agents contain- ing acids. A proprietary cleaning agent for stainless steel can be used on the stainless steel cooktop surface.

Control panel / Control knob

Do not use any scouring agents or pads on the knob or control panel, as these could cause damage.

Clean the control knob and the control panel with hot water and a little dish- washing liquid.

After application, rub dry with a clean cloth.

Under no circumstances use a steam-cleaning appliance to clean the gas cooktop. The steam could penetrate to live components and cause a short circuit.

15

Image 15
Contents @äö Description of the appliance Stainless steel cover-EA Data plateContents For Canada only For your safetyHelp protect our environment Disposal of packagingDisposal of your old machine Important notes for the installer Important safety instructionsPage Page Save the Instructions Burner control BurnerPower cut Lids MaterialShape of woks, pots and pans Wok / Pan baseCleaning and care Burner capsElectronic ignition Wok/pan support, trivet Cooktop surfaceControl panel / Control knob Electric spark ignition for the gas burner no longer works? Problem solving guideShape and color of the flame are different from usual? Gas flame goes out after being lit?After Sales Service ÖElectrical connection Technical data CDN / USAElectrical connection NZ Technical data AUS NZ@äElectrical connection Electrical connection AUSÖGas connection Pressure regulator For CDN only Nominal rating for all types of gas USA/CDNFor USA only @äGas connection Nominal rating for all types of gas at the high settingAppliance dimensions Gas connection CDN/USA Gas connection AUS/NZ ÖInstructions for building-in Zone Combiset Place the seal provided f under the edge of the cooktop @äClearance above and around the appliance @äClearance above and around the appliance @äInstallation InstallationData plate details @äInstallation @äInstructions for building-in Reference table jet sizes ÖConversion to alternative types of gasNatural gas Liquid gas ÖConversion to alternative types of gas After conversion @äConversion to alternative types of gas RemarksConversion Natural gas Liquid gas @äConversion to alternative types of gas After conversion Page Page Page Alteration rights reserved / 22