Miele KM 81-2 operating instructions ÖInstructions for building-in

Page 25

Instructions for building-in

There may be a wall at the rear and a wall or tall units at one side. On the other side however, no unit or divider must stand higher than the cooktop.

With kitchen cabinetry, the following minimum dimensions must be kept:

a distance of 10" (250 mm) from adjacent units if they are suscep- tible to heat, otherwise some form of insulation must be installed.

a distance of 30" (76 cm) between the cooktop and any wall cabinet installed above it.

a distance of 26" (65 cm) between the cooktop and cooker hood, or more if building regulations require.

All backsplashes must be of heat re- sistant material. With all kitchen cabinet suppliers, please comply with their recommendations for dis- tances.

If a drawer or shelf is installed underneath the cooktop unit, ensure that there is a distance of at least 3" (80 mm) between the base of the cooktop unit and the upper edge of the drawer or shelf.

Ensure that nothing rubs the gas pipe when drawer, cabinet door, etc. are moved.

25

Image 25
Contents @äö Description of the appliance Stainless steel cover-EA Data plateContents For Canada only For your safetyDisposal of packaging Help protect our environmentDisposal of your old machine Important notes for the installer Important safety instructionsPage Page Save the Instructions Burner control BurnerPower cut Shape of woks, pots and pans MaterialWok / Pan base LidsBurner caps Cleaning and careElectronic ignition Cooktop surface Wok/pan support, trivetControl panel / Control knob Shape and color of the flame are different from usual? Problem solving guideGas flame goes out after being lit? Electric spark ignition for the gas burner no longer works?After Sales Service ÖElectrical connection Technical data CDN / USA@äElectrical connection Technical data AUS NZElectrical connection AUS Electrical connection NZÖGas connection Nominal rating for all types of gas USA/CDN Pressure regulator For CDN onlyFor USA only @äGas connection Nominal rating for all types of gas at the high settingAppliance dimensions Gas connection CDN/USA Gas connection AUS/NZ ÖInstructions for building-in Zone Combiset Place the seal provided f under the edge of the cooktop @äClearance above and around the appliance @äClearance above and around the appliance Installation @äInstallationData plate details @äInstallation @äInstructions for building-in Reference table jet sizes ÖConversion to alternative types of gasNatural gas Liquid gas ÖConversion to alternative types of gas After conversion Remarks @äConversion to alternative types of gasConversion Natural gas Liquid gas @äConversion to alternative types of gas After conversion Page Page Page Alteration rights reserved / 22