Miele KM 81-2 operating instructions @äInstructions for building-in

@äInstructions for building-in

	Depth	Width
	in	(=
	mm	Dimen-
		sion B)
		in mm
2 zone Combiset
1 element	490	265
2 elements	490	558
3 elements	490	851
4 elements	490	1144
5 elements	490	1437
4 zone Combiset
1 elements	490	560
2 elements	490	1143
3 elements	490	1728
Combination
One 2 zone
+ one 4 zone	490	851
Two 2 zone
+ one 4 zone	490	1143
Three 2 zone
+ one 4 zone	490	1437
One 2 zone
+ two 4 zone	490	1436
Two 2 zone
+ two 4 zone	490	1729

Extractor (e.g. DA 8-2)

For building in between two appliances: - Dimension B increases by 90 mm.

For building in at the end of a combination: - Dimension B increases by 98 mm.

Stick the seal provided f under the

edge of the cooktop.

loosen tighten

bAppliance

cTensioning screw d Clamp

e Worktop f Seal

Turn the tensioning screws c in the clamps in an anti-clockwise direction into the appliance b until a resist- ance is met and turn the clamp to the left.

Place the appliance into position, turn the clamps and tighten the ten- sioning screws until the clamps press into the worktop e.

Connect the appliance to the elec- tricity supply.

Connect the appliance to the gas supply in accordance with gas sup- ply regulations.

When building-in several Combiset units, a spacer bar must be fitted be- tween each unit. It is supplied with its own installation instructions.

32