@äGas connection

Connection to the gas supply, or conversion from use on one type of gas to another should only be undertaken by an approved, who is responsible for correct functioning of the appliance when installed.

The gas cooktop is suitable for natural gas and LPG.

Check with your local Gas Supplier for details about the type of gas and calorific value from your Gas Board and compare this information with the type of gas quoted on the data plate.

For LPG consult your Miele-Dealer or the service Department for the cor- rect gas jet kit. Instructions for con- version to alternative forms of gas can be found on pages 36-39.

The gas connection must be in- stalled so that it can be connected either from inside or outside the kit- chen unit and the stop-valve must be easily accessible and visible, by opening one of the furniture doors, if necessary.

The gas connection must be in accord- ance with local and national regulations and should be tested for possible leak- age.

The appliance may only be connected by a qualified gas fitter who is respon- sible for correct functioning of the ap- pliance when installed.

When the gas cooktop has been in- stalled, it is essential to check that neither the gas pipe nor the mains cable are in contact with hot parts of the appliance, otherwise tempera- ture damage to the pipe and the cable could occur.

Nominal rating for all types of gas at the high setting:

burner	gas type	rating
		in MJ/h

small +	natural gas	17.28
large
small +	LPG	17.28
large	(Propane)
small +	LPG	17.28
large	(Propane/
	Butane)