Miele DG155-3, DG155-2, DG155-1 operating instructions Turning the oven on, Selecting a program

Page 19

Operation

Turning the oven on

Do not worry if your appliance makes unusual noises. This will occur when the steam generating unit is being filled or emptied and when the pump is activated.

When the oven is turned on, the fan which extracts steam from the oven will also be heard. The fan will continue running for a while after the oven has been turned off.

To use the oven follow these four steps:

1.Select a program

2.Adjust the temperature if necessary

3.Set the cooking time

4.Press Start

The lit bar between the buttons will prompt you to set the next step.

The following pages describe these steps in more detail.

Selecting a program

^Turn the program selector to the desired program, e.g. COOK - Veg.

The preset temperature, e.g. 100 °C (boil) will appear in the display for a short time.

19

Image 19

Contents Operating instructions Steam oven Contents Special uses Cleaning and careHelp protect our environment Electrical Safety Important Safety InstructionsScalding and Burning hazards UseAppliance damage ChildrenFurther safety notes Appliance maintenanceGuide to the steam oven Control panel Included AccessoriesValve insert, t, white Silicone grease Connecting valveRing, u, black Container Capacity Height in inches cm Pt l OptionalTool Setting the water hardness level Before using for the first timeSetting the altitude When the time has elapsed you will see the following display Changing the temperature display Temperature Corresponding Selecting a temperatureBefore each use OperationSelecting a program Turning the oven onProgram table Program Preset Temperature Suggested useRange F C Adjusting the temperature F C Changing the preset temperature permanentlySetting the cooking time Starting the cooking process Operation Changing a program Interrupting a programTo continue After use At the end of cookingTo continue cooking To turn offDuring a program Insufficient water / water container not in placeAfter a program has ended with the program selector at Overheating protection To reset the ovenTo activate the safety lock Safety lockTo deactivate the safety lock Suitable containers Cooking tipsFood Vegetables Program SteamingTime in minutes Pate Food Program Temperature Time F C Minutes Meat and sausageFish and seafood BakesFruit LegumesSide dishes EggsCooking tips Meat DefrostingTips on defrosting Preparing a whole meal Meal planningMenu suggestions Program Time in minutes Meal planning Canning Special usesBlanching ReheatingDisinfecting baby bottles Stainless steel Cleaning and careAppliance front Drip tray, rack and cooking containersOpen the door fully Removable door and drip plateRunners Cooking compartmentTo replace the valve insert t ConnectorRing To change the O-Ring u on the water container Descaling lockDescaling Cleaning and care Appliance does not heat? Frequently asked questionsThere was a power failure during a program. Press Start For USA only Electrical connectionFor CDN only Data Plate After sales serviceDisposal of packing materials Help protect our environmentDisposal of an old appliance Alteration rights reserved