Frequently asked questions
... the following symbols and figures appear in the display and a tone sounds:
p j: Insufficient water
Check whether:
–the water container has been pushed in as far as it will go.
–there is sufficient water in the water container.
–any parts of the connector are deteriorated or broken and need replacing.
See "Connector" section for details.
k j 0: The appliance has locked and requires descaling (see "Descaling").
... the oven cavity temperature and the temperature symbol are flashing in the display:
There was a power failure during a program. Press Start.
... after turning the appliance off (program selector at the "0" position) a continual tone is heard and F1 appears in the display?
Check whether the water container is in the appliance to accept residual water being pumped back out of the oven.
52