GE PSB1200WW, ZSC1201SS, ZSC1202SS, PSB1201SS, PSB1200BB Assembling the Oven to Drawer

Page 18

ASSEMBLY TO ADVANTIUM BUILT-IN SPEEDCOOK OVEN

ASSEMBLING THE OVEN TO DRAWER (cont.)

C

Remove the front two bottom screws on each side of the oven and the top center screw on each side of the storage drawer.

D

Place the side supports into the tabs on the drawer and secure using the screws supplied and the screws removed in Step C.

Side

Support

E

120v only

The oven and storage drawer assembly is now ready to be installed. Return to the Advantium 120V or 240V Built-In SpeedCook Oven Installation Instructions to complete

the installation.

18

Image 18

Contents Installation Instructions Contents Models AvailableAdvance Planning Safety glasses or gogglesParts Supplied 8 ″Single Advantium 120 Installation Electrical RequirementsElectrical Location Single Advantium 120V Installation Prepare the OpeningInstallation over a GE/Monogram oven Installation over a GE/Monogram Oven and Warming Drawer17-1/2″ 25-1/4″ Drawer30″ 23-1/2″ ″ Min2″Min 2″Recommended 30″ 21″ 36-3/4″ Min 23-1/2″ 25-1/4″ Construct Solid 30″23-1/2″21 ″ All Four SidesWarming Drawer 21″ 25-1/4″ Cooktop Installation Instructions Slide the Oven Into the Cutout Discard plastic trim. Replace screwsInstall Bottom Trim Install Mounting ScrewsFinalize Installation Tools Required ZX2201SS-Stainless Steel for installation above 36″ onlyAllow 15″ clearance When fully open JX2200BB-Black JX2201SS-Stainless SteelRemove Packaging and Parts Assembling the Oven to DrawerAssembling the Oven to Drawer Page GE Consumer & Industrial