GE C2S980 Using the upper oven controls, Operating Instructions Safety Instructions

Page 12

Operating Instructions Safety Instructions

Using the upper oven controls.

(Throughout this manual, features and appearance may vary from your model.)

Features and appearance may vary.

Oven Control, Clock, Timer and Features

BAKE Pad

DELAY START Pad

Touch to select the bake function.

Use along with COOKING TIME or SELF

BROIL HI/LO Pad

CLEAN pads to set the oven to start and

stop automatically at a time you set.

Touch to select the broil function.

 

Installation

Instructions

Consumer Support Troubleshooting Tips

CONVECTION BAKE MULTI/1 RACK Pad

Touch to select baking with the convection function.

CONVECTION ROAST Pad

Touch to select roasting with the convection function.

START Pad

Must be touched to start any cooking or cleaning function.

Display

Shows the time of day, oven temperature, whether the oven is in the bake, broil or self-cleaning mode, the times set for the timer or automatic oven operations, and if the range is locked.

SELF-CLEAN Pad

Touch to select self-cleaning function. See the

Using the self-cleaning oven section.

If “F– and a number or letter” flash in the display and the oven control signals, this indicates a function error code. Touch the CLEAR/OFF pad. Allow the oven to cool for one hour. Put the oven back into operation. If the function error code repeats, disconnect the power to the oven and call for service.

If your oven was set for a timed oven operation and a power outage occurred, the clock and all programmed functions must be reset.

The time of day will flash in the display when there has been a power outage.

OVEN LIGHT Pad

Touch to turn the oven light on or off.

12

COOKING TIME Pad

Touch and then touch the number pads to set the amount of time you want your food to cook. The oven will shut off when the cooking time has run out.

CLEAR/OFF Pad

Touch to cancel ALL upper oven operations except the clock, timer and Gas/Control Lockout.

CLOCK Pad

Touch before setting the clock.

Number Pads

Use to set any function requiring numbers such as the time of day on the clock, the timer, the oven temperature, the internal food temperature, the start time and length of operation for timed baking and self-cleaning.

KITCHEN TIMER ON/OFF Pad

Touch to select the timer feature.

PROBE Pad

Touch when using the probe to cook food.

GAS/CONTROL LOCKOUT Pad

Touch and hold the GAS/CONTROL LOCKOUT pad for 3 seconds to lock/unlock the surface burners, oven burners and control panel so they cannot be activated.

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Safety Instructions Troubleshooting TipsWrite the model and serial numbers here Model # Serial # Operating Instructions Safety Instructions Installation ANTI-TIP DeviceTroubleshooting Tips Consumer Support All ranges can tip and injury could resultGe.com Operating Instructions Safety Instructions Installation InstructionsConsumer Support Safety Safety Instructions Operating InstructionsLower Oven Drawer Instructions Safety Instructions Operating Installation InstructionsSupport Troubleshooting TipsUsing the gas surface burners SafetyInstructions Installation SupportUsing the griddle Safety InstructionsHow to Insert the Griddle Using the GriddleTroubleshooting Tips Case of Power FailureTop-of-Range Cookware Stove Top GrillsUsing the upper oven controls Operating Instructions Safety InstructionsConsumer Support Troubleshooting Tips Using the upper oven Instructions OperatingBefore you begin… Upper Oven VentHow to Set the Upper Oven for Baking or Roasting Preheating and Pan PlacementOperating Aluminum FoilHow to Set the Upper Oven for Broiling-Close the oven door Broiling GuideHI Broil Broil HI/LO pad againUsing the clock and timer Instructions SafetyInstallation Instructions Tips Using the timed baking Roasting features upper oven only How to Set an Immediate Start and Automatic StopHow to Set a Delayed Start and Automatic Stop Operating InstructionsUsing the probe How to Set the Upper Oven For Roasting When Using the ProbeInsert the probe into the food Using the convection oven Convection BakeConvection Roast Auto Recipe ConversionInstallation Instructions Troubleshooting Tips Multi-Shelf BakingCookware for Convection Cooking Paper and PlasticTouch the Convection Roast pad Convection Roasting Guide Using the timed convection Baking features upper oven only Make sure the clock shows the correct time of daySpecial features of your upper oven control Fahrenheit or Celsius Temperature SelectionHour Shut-Off Tones at the End of a Timed CycleSafety Gas/Control Lockout on some models InstructionsCook and Hold Hour, 24 Hour or Clock Black-OutUsing the Sabbath Feature. on some models How to Set for Regular Baking/RoastingHow to Exit the Sabbath Feature Adjust the upper oven thermostat-Do it yourself To Adjust the ThermostatType of margarine will affect baking performance Using the lower oven drawer Adjust the oven thermostat-Do it yourselfOperating Instructions Safety To Use the Lower Oven DrawerUsing the self-cleaning upper oven Before a Clean CycleHow to Set the Upper Oven for Cleaning Instructions Operating InstructionsAfter a Clean Cycle How to Delay the Start of CleaningTo start Touch the Start pad Care and cleaning of the range Sealed Burner AssembliesTurn all controls OFF before removing the burner parts Burner Caps and Heads Tips Consumer Support Burner GratesCooktop Surface Griddle Precautions GriddleStainless Steel Surfaces on some models Griddle is to be used over the center burner onlyTo clean the inside of the door To clean the outside of the doorLift-Off Oven Door Oven Heating ElementsRemovable Lower Oven Drawer Glass WindowTo remove the drawer To replace the drawer Slide the drawer all the wayOven Air Vents Upper Control PanelLower Control Panel and Knobs Oven Light Replacement Oven Shelves and Drawer RacksTo remove Do not remove any screws to remove the coverInstallation of the range Safety Instructions Operating InstructionsInstructions Installation If you smell gasInstallation Instructions Operating InstructionsDimensions and Clearances Operating Instructions Safety Gas line shut-off valveRecommended Gas Pipe Outlet Locations Safety Instructions Troubleshooting Tips Consumer SupportOperating Gas Supply RequirementsElectrical Power Supply Requirements Provide Proper Electrical SupplyRecommended Electrical Outlet Locations Locate the electric supply as illustratedFlexible Connector Hookup Rigid Pipe Hookup Options Connect the Range to the Gas SupplyTeflon Registered trademark of DuPont Using an Existing Nema 14-50R Receptacle Replace the Power Cord OptionalRemove the wire cover on the back Do not discard these screwsWire Power Cord Installation Option Insert the new power cord through the strainWire Conduit Installation Option Wire Conduit Installation Option Safety Instructions Replace the Wire CoverTips Consumer Oval Center Burner Head/Cap Assembly Seal the OpeningsAssemble Surface Burners CapsSafety Instructions Operating Check Ignition of Surface BurnersQuality of Flames Level the RangeInstructions Safety Install the Anti-Tip DeviceWhen All Hookups Are Completed Must be performed by a qualified LP gas installerBefore you call for service… Troubleshooting Tips Consumer SupportProblem Possible Causes What To Do Clock and timer Self-cleanAfter a clean cycle Is setSafety Instructions Operating Instructions Installation Wait for the self-clean cycle to finish and the oven Fully extend the drawer and push it all the wayTo cool Controls improperly set See the Lower oven drawer sectionAccessories Looking For Something More?Consumer Support We’ll Cover Any Appliance. Anywhere Anytime GE Service Protection PlusConsumer Product Ownership Registration GE Will Replace What GE Will Not CoverWarrantor General Electric Company. Louisville, KY One YearGE Dual Fuel Range Warranty. For customers in Canada Instructions Safety InstructionsMabe Will Replace What Mabe Will Not CoverInstallation Instructions Consumer Support GE Appliances Website
Related manuals
Manual 64 pages 46.44 Kb

C2S980 specifications

The GE C2S980,04-09 JR,49-85167-1,183D5580P249 is a sophisticated control system utilized in various industrial applications, specifically designed for enhancing efficiency and reliability. This model exemplifies advanced technologies and systems integration, catering to the needs of modern industries.

One of the main features of the GE C2S980 is its flexibility, allowing it to be integrated seamlessly into different types of systems. This adaptability makes it suitable for manufacturing plants, power generation facilities, and other industrial environments. The device is engineered for mobility and can be quickly deployed or modified according to the operational requirements of the facility.

A notable technology embedded within the GE C2S980 is its robust data acquisition capabilities. It can gather and process large volumes of data in real-time, which is crucial for effective monitoring and control. This feature enables operators to make informed decisions based on accurate and up-to-date information regarding equipment performance and system health.

Additionally, the GE C2S980 is equipped with advanced diagnostic tools. These tools assist in identifying faults and inefficiencies within the system, thereby reducing maintenance costs and minimizing downtime. Its built-in analytics engine helps in predictive maintenance, enabling industries to foresee potential issues before they escalate into serious problems.

The C2S980 also prioritizes user experience, featuring an intuitive interface that simplifies the navigation of complex controls. This user-friendly design reduces the learning curve for operators, enhancing overall productivity.

Another critical characteristic is its compliance with industry standards, ensuring safety and reliability in various applications. The system is designed to operate in challenging conditions and is built to withstand environmental factors, thus guaranteeing longevity and consistent performance.

In terms of connectivity, the GE C2S980 supports various protocols, facilitating interoperability with other devices and systems. This connectivity is essential for industries that rely on integrating multiple technologies into their operations.

Overall, the GE C2S980,04-09 JR,49-85167-1,183D5580P249 stands out due to its combination of advanced technology, user-centric design, and adaptability to diverse industrial environments, making it an invaluable asset for enhancing operational efficiencies.
Top Page Image Contents