GE C2S980 Instructions Safety Instructions, Operating Installation Instructions, Tips

Page 8

Instructions Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

COOK MEAT AND POULTRY THOROUGHLY…

Cook meat and poultry thoroughly—meat to at least an INTERNAL temperature of 160°F and poultry to at least an INTERNAL temperature of 180°F. Cooking to these temperatures usually protects against foodborne illness.

UPPER OVEN

Stand away from the range when opening the door of a hot oven. The hot air and steam that escape can cause burns to hands, face and eyes.

Operating

Installation

Instructions

 

 

Do not use the oven for a storage area. Items stored in the oven can ignite.

Keep the oven free from grease buildup.

Place the oven shelves in the desired position while the oven is cool. If shelves must be handled when hot, do not let

pot holder contact the heating elements.

Pulling out the shelf to the stop-lock is a convenience in lifting heavy foods. It is also a precaution against burns from touching hot surfaces of the door or oven walls. The lowest position “R” is not designed to slide.

Do not heat unopened food containers. Pressure could build up and the container could burst, causing an injury.

When using cooking or roasting bags in the oven, follow the manufacturer’s directions.

Do not use your oven to dry newspapers. If overheated, they can catch fire.

Do not leave paper products, cooking utensils or food in the oven when not in use.

Keep the oven vent unobstructed.

Make sure any broiler pan is in place correctly to reduce the possibility of grease fires.

If you should have a grease fire in a broiler pan, press the CLEAR/OFF pad and keep the oven door closed to contain fire until it burns out.

Never place, use or self-clean the lower oven drawer pan in the upper oven.

Tips

SELF-CLEANING UPPER OVEN

Support Troubleshooting

Be sure to wipe up excess spillage before self-cleaning operation.

Before self-cleaning the oven, remove the shelves, any broiler pan, grid and other cookware.

Never place, use or self-clean the lower oven drawer pan in the upper oven.

Do not clean the door gasket. The door gasket is essential for a good seal. Care should be taken not to rub, damage or

move the gasket.

Clean only parts listed in this Owner’s Manual.

If the self-cleaning mode malfunctions, turn the oven off and disconnect the power supply. Have it serviced by a qualified technician.

Do not use oven cleaners. No commercial oven cleaner or oven liner of any kind should be used in or around any part of the oven. Residue from oven cleaners will damage the inside of the oven when the self-clean cycle is used.

Consumer

READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.

SAVE THESE INSTRUCTIONS

8

Image 8
Contents Write the model and serial numbers here Model # Serial # Safety InstructionsTroubleshooting Tips Operating Instructions Safety Instructions Installation ANTI-TIP DeviceGe.com Troubleshooting Tips Consumer SupportAll ranges can tip and injury could result Consumer Support Operating Instructions Safety InstructionsInstallation Instructions Safety Safety Instructions Operating InstructionsLower Oven Drawer Instructions Safety Instructions Operating Installation InstructionsSupport Troubleshooting TipsUsing the gas surface burners SafetyInstructions Installation SupportUsing the griddle Safety InstructionsHow to Insert the Griddle Using the GriddleTroubleshooting Tips Case of Power FailureTop-of-Range Cookware Stove Top GrillsConsumer Support Troubleshooting Tips Using the upper oven controlsOperating Instructions Safety Instructions Using the upper oven Instructions OperatingBefore you begin… Upper Oven VentHow to Set the Upper Oven for Baking or Roasting Preheating and Pan PlacementOperating Aluminum FoilHow to Set the Upper Oven for Broiling-Close the oven door Broiling GuideHI Broil Broil HI/LO pad againInstallation Instructions Tips Using the clock and timerInstructions Safety Using the timed baking Roasting features upper oven only How to Set an Immediate Start and Automatic StopHow to Set a Delayed Start and Automatic Stop Operating InstructionsInsert the probe into the food Using the probeHow to Set the Upper Oven For Roasting When Using the Probe Using the convection oven Convection BakeConvection Roast Auto Recipe ConversionInstallation Instructions Troubleshooting Tips Multi-Shelf BakingCookware for Convection Cooking Paper and PlasticTouch the Convection Roast pad Convection Roasting Guide Using the timed convection Baking features upper oven only Make sure the clock shows the correct time of daySpecial features of your upper oven control Fahrenheit or Celsius Temperature SelectionHour Shut-Off Tones at the End of a Timed CycleSafety Gas/Control Lockout on some models InstructionsCook and Hold Hour, 24 Hour or Clock Black-OutHow to Exit the Sabbath Feature Using the Sabbath Feature. on some modelsHow to Set for Regular Baking/Roasting Type of margarine will affect baking performance Adjust the upper oven thermostat-Do it yourselfTo Adjust the Thermostat Using the lower oven drawer Adjust the oven thermostat-Do it yourselfOperating Instructions Safety To Use the Lower Oven DrawerUsing the self-cleaning upper oven Before a Clean CycleHow to Set the Upper Oven for Cleaning Instructions Operating InstructionsTo start Touch the Start pad After a Clean CycleHow to Delay the Start of Cleaning Turn all controls OFF before removing the burner parts Care and cleaning of the rangeSealed Burner Assemblies Burner Caps and Heads Cooktop Surface Tips Consumer SupportBurner Grates Griddle Precautions GriddleStainless Steel Surfaces on some models Griddle is to be used over the center burner onlyTo clean the inside of the door To clean the outside of the doorLift-Off Oven Door Oven Heating ElementsRemovable Lower Oven Drawer Glass WindowTo remove the drawer To replace the drawer Slide the drawer all the wayLower Control Panel and Knobs Oven Air VentsUpper Control Panel Oven Light Replacement Oven Shelves and Drawer RacksTo remove Do not remove any screws to remove the coverInstallation of the range Safety Instructions Operating InstructionsInstructions Installation If you smell gasInstallation Instructions Operating InstructionsDimensions and Clearances Operating Instructions Safety Gas line shut-off valveRecommended Gas Pipe Outlet Locations Safety Instructions Troubleshooting Tips Consumer SupportOperating Gas Supply RequirementsElectrical Power Supply Requirements Provide Proper Electrical SupplyRecommended Electrical Outlet Locations Locate the electric supply as illustratedTeflon Registered trademark of DuPont Flexible Connector Hookup Rigid Pipe Hookup OptionsConnect the Range to the Gas Supply Using an Existing Nema 14-50R Receptacle Replace the Power Cord OptionalRemove the wire cover on the back Do not discard these screwsWire Power Cord Installation Option Insert the new power cord through the strainWire Conduit Installation Option Tips Consumer Wire Conduit Installation Option Safety InstructionsReplace the Wire Cover Oval Center Burner Head/Cap Assembly Seal the OpeningsAssemble Surface Burners CapsSafety Instructions Operating Check Ignition of Surface BurnersQuality of Flames Level the RangeInstructions Safety Install the Anti-Tip DeviceWhen All Hookups Are Completed Must be performed by a qualified LP gas installerProblem Possible Causes What To Do Before you call for service…Troubleshooting Tips Consumer Support Clock and timer Self-cleanAfter a clean cycle Is setSafety Instructions Operating Instructions Installation Wait for the self-clean cycle to finish and the oven Fully extend the drawer and push it all the wayTo cool Controls improperly set See the Lower oven drawer sectionAccessories Looking For Something More?Consumer Support We’ll Cover Any Appliance. Anywhere Anytime GE Service Protection PlusConsumer Product Ownership Registration GE Will Replace What GE Will Not CoverWarrantor General Electric Company. Louisville, KY One YearGE Dual Fuel Range Warranty. For customers in Canada Instructions Safety InstructionsMabe Will Replace What Mabe Will Not CoverInstallation Instructions Consumer Support GE Appliances Website
Related manuals
Manual 64 pages 46.44 Kb

C2S980 specifications

The GE C2S980,04-09 JR,49-85167-1,183D5580P249 is a sophisticated control system utilized in various industrial applications, specifically designed for enhancing efficiency and reliability. This model exemplifies advanced technologies and systems integration, catering to the needs of modern industries.

One of the main features of the GE C2S980 is its flexibility, allowing it to be integrated seamlessly into different types of systems. This adaptability makes it suitable for manufacturing plants, power generation facilities, and other industrial environments. The device is engineered for mobility and can be quickly deployed or modified according to the operational requirements of the facility.

A notable technology embedded within the GE C2S980 is its robust data acquisition capabilities. It can gather and process large volumes of data in real-time, which is crucial for effective monitoring and control. This feature enables operators to make informed decisions based on accurate and up-to-date information regarding equipment performance and system health.

Additionally, the GE C2S980 is equipped with advanced diagnostic tools. These tools assist in identifying faults and inefficiencies within the system, thereby reducing maintenance costs and minimizing downtime. Its built-in analytics engine helps in predictive maintenance, enabling industries to foresee potential issues before they escalate into serious problems.

The C2S980 also prioritizes user experience, featuring an intuitive interface that simplifies the navigation of complex controls. This user-friendly design reduces the learning curve for operators, enhancing overall productivity.

Another critical characteristic is its compliance with industry standards, ensuring safety and reliability in various applications. The system is designed to operate in challenging conditions and is built to withstand environmental factors, thus guaranteeing longevity and consistent performance.

In terms of connectivity, the GE C2S980 supports various protocols, facilitating interoperability with other devices and systems. This connectivity is essential for industries that rely on integrating multiple technologies into their operations.

Overall, the GE C2S980,04-09 JR,49-85167-1,183D5580P249 stands out due to its combination of advanced technology, user-centric design, and adaptability to diverse industrial environments, making it an invaluable asset for enhancing operational efficiencies.