GE C2S980 Stainless Steel Surfaces on some models, Griddle Precautions, Protecting

Page 34

Care and cleaning of the range.

Operating Instructions Safety Instructions

Griddle

NOTES:

The griddle is to be used over the center burner only.

Do not clean the griddle in a self-cleaning oven.

Do not clean the griddle in a dishwasher.

Wash with hot, soapy water after each use while using a sponge or dishcloth.

If oil or food residue is left on the griddle, further cooking will harden the residue and cause sticking over time. In this case, use a non-abrasive cleanser such as Bon Ami® or one of the soft scrub cleansers. Apply with a sponge, Scrunge® or other cleaning pad labeled safe for non-stick pans

Use only plastic, nylon or wooden utensils or SilverStone® kitchen tools to prevent marring of the coating.

Never use knives or cut food on the griddle. Wash with hot, soapy water after each use. Store carefully to prevent scratching.

Griddle Precautions:

If something has spilled under the griddle, it should be cleaned up as soon as possible to prevent “baked on” food soil.

Do not allow grease to accumulate under the griddle as it can be a fire hazard. Clean under the griddle as soon as it is cool. Clean with hot soapy water.

Do not place your griddle in the microwave.

Always turn off all surface burners before removing the griddle. Use caution when handling a hot griddle.

Stainless Steel Surfaces (on some models)

Protecting

Cleaning Instructions:

Consumer Support Troubleshooting Tips

34

STAINLESS STEEL has a reputation for withstanding tough abuse for years. This is a key reason why it is so popular with the food service industry.

However, stainless steel appliances can have surface imperfections, discolorations or blemishes that consumers with a critical eye notice and find unattractive in the home. These discolorations or blemishes can be caused by something as simple as leaving fingerprint smudges on the stainless steel surface overnight.

For stainless steel appliances where blemishes are prone to show on the surface, we recommend APPLYING A COAT OF CERAMA BRYTE® Stainless Steel Cleaning Polish & Conditioner (purchased separately—follow instructions).

This will help you to maintain the brightness and appearance of your stainless steel appliance.

Cleaning

Do not use a steel wool pad; it will scratch the surface.

In order to avoid any discolorations and/or grease stains, we recommend cleaning and removing any spills, spots and grease from the range after use.

It is important to use a soft cloth or paper towel every time the range is cleaned to avoid any scratches.

Read carefully the instructions on the back of the Brightener (included with your range) for better results.

Remove grates.

Wash using warm, soapy water:

Wet soft cloth or paper towel (avoid using excessive water).

Wipe the surface in the direction of the grain (following the steel lines).

Rinse and wring out a soft cloth or paper towel and dry the range.

Apply a degreaser that does not contain sodium hydroxide or Stainless Steel Cleaner (follow instructions).

Apply Cerama Bryte® Stainless Steel Brightener (follow instructions).

Repeat steps 2–4 as many times as needed.

Put grates back in place.

Follow these instructions for any Stainless Steel surface on your range.

DO NOT USE the following products for cleaning the Cooktop or Stainless Steel parts:

Caustic Lye (Sodium Hydroxide) or cleaners containing this chemical

Hard or Steel Wool Pads

Abrasive Materials or Chemicals

To inquire about purchasing stainless steel appliance cleaner or polish, or to find the location of a dealer nearest you, please call our toll-free number:

National Parts Center 800.626.2002 (U.S.) 888.261.3055 (Canada)

ge.com (U.S.) www.GEAppliances.ca (Canada)

Image 34
Contents Troubleshooting Tips Safety InstructionsWrite the model and serial numbers here Model # Serial # Operating Instructions Safety Instructions Installation ANTI-TIP DeviceAll ranges can tip and injury could result Troubleshooting Tips Consumer SupportGe.com Installation Instructions Operating Instructions Safety InstructionsConsumer Support Safety Safety Instructions Operating InstructionsLower Oven Drawer Support Troubleshooting Instructions Safety InstructionsOperating Installation Instructions TipsInstructions Installation Using the gas surface burnersSafety SupportHow to Insert the Griddle Using the griddleSafety Instructions Using the GriddleTop-of-Range Cookware Troubleshooting TipsCase of Power Failure Stove Top GrillsOperating Instructions Safety Instructions Using the upper oven controlsConsumer Support Troubleshooting Tips Before you begin… Using the upper ovenInstructions Operating Upper Oven VentOperating How to Set the Upper Oven for Baking or RoastingPreheating and Pan Placement Aluminum FoilHI Broil How to Set the Upper Oven for Broiling-Close the oven doorBroiling Guide Broil HI/LO pad againInstructions Safety Using the clock and timerInstallation Instructions Tips How to Set a Delayed Start and Automatic Stop Using the timed baking Roasting features upper oven onlyHow to Set an Immediate Start and Automatic Stop Operating InstructionsHow to Set the Upper Oven For Roasting When Using the Probe Using the probeInsert the probe into the food Convection Roast Using the convection ovenConvection Bake Auto Recipe ConversionCookware for Convection Cooking Installation Instructions Troubleshooting TipsMulti-Shelf Baking Paper and PlasticTouch the Convection Roast pad Convection Roasting Guide Using the timed convection Baking features upper oven only Make sure the clock shows the correct time of dayHour Shut-Off Special features of your upper oven controlFahrenheit or Celsius Temperature Selection Tones at the End of a Timed CycleCook and Hold Safety Gas/Control Lockout on some modelsInstructions Hour, 24 Hour or Clock Black-OutHow to Set for Regular Baking/Roasting Using the Sabbath Feature. on some modelsHow to Exit the Sabbath Feature To Adjust the Thermostat Adjust the upper oven thermostat-Do it yourselfType of margarine will affect baking performance Operating Instructions Safety Using the lower oven drawerAdjust the oven thermostat-Do it yourself To Use the Lower Oven DrawerHow to Set the Upper Oven for Cleaning Using the self-cleaning upper ovenBefore a Clean Cycle Instructions Operating InstructionsHow to Delay the Start of Cleaning After a Clean CycleTo start Touch the Start pad Sealed Burner Assemblies Care and cleaning of the rangeTurn all controls OFF before removing the burner parts Burner Caps and Heads Burner Grates Tips Consumer SupportCooktop Surface Stainless Steel Surfaces on some models Griddle PrecautionsGriddle Griddle is to be used over the center burner onlyLift-Off Oven Door To clean the inside of the doorTo clean the outside of the door Oven Heating ElementsTo remove the drawer To replace the drawer Removable Lower Oven DrawerGlass Window Slide the drawer all the wayUpper Control Panel Oven Air VentsLower Control Panel and Knobs To remove Oven Light ReplacementOven Shelves and Drawer Racks Do not remove any screws to remove the coverInstructions Installation Installation of the rangeSafety Instructions Operating Instructions If you smell gasInstallation Instructions Operating InstructionsDimensions and Clearances Operating Instructions Safety Gas line shut-off valveOperating Recommended Gas Pipe Outlet Locations Safety InstructionsTroubleshooting Tips Consumer Support Gas Supply RequirementsRecommended Electrical Outlet Locations Electrical Power Supply RequirementsProvide Proper Electrical Supply Locate the electric supply as illustratedConnect the Range to the Gas Supply Flexible Connector Hookup Rigid Pipe Hookup OptionsTeflon Registered trademark of DuPont Remove the wire cover on the back Using an Existing Nema 14-50R ReceptacleReplace the Power Cord Optional Do not discard these screwsWire Power Cord Installation Option Insert the new power cord through the strainWire Conduit Installation Option Replace the Wire Cover Wire Conduit Installation Option Safety InstructionsTips Consumer Assemble Surface Burners Oval Center Burner Head/Cap AssemblySeal the Openings CapsQuality of Flames Safety Instructions OperatingCheck Ignition of Surface Burners Level the RangeWhen All Hookups Are Completed Instructions SafetyInstall the Anti-Tip Device Must be performed by a qualified LP gas installerTroubleshooting Tips Consumer Support Before you call for service…Problem Possible Causes What To Do After a clean cycle Clock and timerSelf-clean Is setSafety Instructions Operating Instructions Installation To cool Wait for the self-clean cycle to finish and the ovenFully extend the drawer and push it all the way Controls improperly set See the Lower oven drawer sectionAccessories Looking For Something More?Consumer Support We’ll Cover Any Appliance. Anywhere Anytime GE Service Protection PlusConsumer Product Ownership Registration Warrantor General Electric Company. Louisville, KY GE Will ReplaceWhat GE Will Not Cover One YearMabe Will Replace GE Dual Fuel Range Warranty. For customers in CanadaInstructions Safety Instructions What Mabe Will Not CoverInstallation Instructions Consumer Support GE Appliances Website
Related manuals
Manual 64 pages 46.44 Kb

C2S980 specifications

The GE C2S980,04-09 JR,49-85167-1,183D5580P249 is a sophisticated control system utilized in various industrial applications, specifically designed for enhancing efficiency and reliability. This model exemplifies advanced technologies and systems integration, catering to the needs of modern industries.

One of the main features of the GE C2S980 is its flexibility, allowing it to be integrated seamlessly into different types of systems. This adaptability makes it suitable for manufacturing plants, power generation facilities, and other industrial environments. The device is engineered for mobility and can be quickly deployed or modified according to the operational requirements of the facility.

A notable technology embedded within the GE C2S980 is its robust data acquisition capabilities. It can gather and process large volumes of data in real-time, which is crucial for effective monitoring and control. This feature enables operators to make informed decisions based on accurate and up-to-date information regarding equipment performance and system health.

Additionally, the GE C2S980 is equipped with advanced diagnostic tools. These tools assist in identifying faults and inefficiencies within the system, thereby reducing maintenance costs and minimizing downtime. Its built-in analytics engine helps in predictive maintenance, enabling industries to foresee potential issues before they escalate into serious problems.

The C2S980 also prioritizes user experience, featuring an intuitive interface that simplifies the navigation of complex controls. This user-friendly design reduces the learning curve for operators, enhancing overall productivity.

Another critical characteristic is its compliance with industry standards, ensuring safety and reliability in various applications. The system is designed to operate in challenging conditions and is built to withstand environmental factors, thus guaranteeing longevity and consistent performance.

In terms of connectivity, the GE C2S980 supports various protocols, facilitating interoperability with other devices and systems. This connectivity is essential for industries that rely on integrating multiple technologies into their operations.

Overall, the GE C2S980,04-09 JR,49-85167-1,183D5580P249 stands out due to its combination of advanced technology, user-centric design, and adaptability to diverse industrial environments, making it an invaluable asset for enhancing operational efficiencies.