Using the Controls
Notes:
•Door openings will not deactivate Vacation Mode for approximately one hour after activation.
•If vacationing for more than a few days, see the Preparing for Vacation section, page 25.
Temp Alarm
The Temp Alarm system is designed to alert you if the freezer or refrigerator temperatures exceed
normal operating temperatures due to a power outage or other event.
To Activate:
Press the Temp Alarm pad once. The Temp Alarm indicator light will illuminate.
To Deactivate:
Press and hold the Temp Alarm pad for three seconds. The indicator light will go off. If the alarm is not actively showing an alarm condition, then the temp alarm pad does not need to be held down for three seconds.
An Audible Alarm will sound repeatedly if the freezer or refrigerator temperatures have exceeded normal operating temperatures. The temperature display will alternately show the current compartment temperatures and the highest compartment temperatures reached when the power was out, doors left slightly ajar, or system failures.
To Turn Off the Audible Alarm:
Press the Temp Alarm pad once. The Temp Alarm indicator light will continue to flash and the temperatures will alternate until the temperatures have stabilized.
Door Alarm
The Door Alarm feature will alert you when one of the doors has been left open for approximately
three minutes. When this happens, the Door Alarm light will flash and an audible alarm will sound.
To Activate:
Press the Door Alarm pad once. The Door Alarm indicator light will illuminate.
To Deactivate:
Press the Door Alarm pad once. The indicator light will go off.
To Turn Off the Audible Alarm:
Press the Door Alarm pad once OR close the door.
Note: The light bulbs will all turn off if any door is left open for six continuous minutes. Shutting all three doors for one second will cause light bulbs to come back on.
Max Cool
The Max Cool feature is automatically activated and the indicator light illuminates. This feature provides the ability to cool down the refrigerator and freezer after extended door openings or when loading either compartment with warm food. This feature causes the refrigerator and freezer temperatures to drop to the minimum seetings on the control. Important: When the Max Cool feature is in operation,
the 
and 
pads for the Refrigerator and Freezer controls will not operate.
To Activate:
Press the Max Cool pad once. The Max Cool indicator light will illuminate.
To Deactivate:
Press the Max Cool pad once. The indicator light will go off.
Max Cool will deactivate automatically after 2 hours.
User Preferences
Access the User Preferences menu to:
•Change the temperature display from °F to °C.
•Enable or disable audible alarms.
•Adjust the light level at which the Dispenser Auto Light will illuminate when this feature is activated on the ice and water dispenser.
•Activate the Sabbath Mode.
To access the User Preferences menu, press and hold the Door Alarm pad for three seconds. When in the User Preferences mode, a short title for the feature will appear in the Freezer temperature display and the feature status will appear in the Refrigerator display.
1.Use the Freezer 
and 
control to scroll through the features.
2.When the desired feature is displayed, use the
Refrigerator | and | control to change the |
status. |
|
|
3.When changes are complete, press the Door Alarm pad for three seconds.
Temperature Display (F_C)
Change the display to show temperatures in degrees Fahrenheit or degrees Celsius.
Alarm (AL)
When the Alarm mode is off, all tones will be disabled until the feature is turned on (alarms are still enabled).
Auto Light Level Selection (LL)
This setting adjusts the light level at which the dispenser light will illuminate when the sensor detects
11