About the temperature controls. | GEAppliances.com |
ADJUST FREEZER TEMP | ADJUST REFRIGERATOR TEMP | ||
COLDER | WARMER | COLDER | WARMER |
| 9 IS COLDEST |
| 9 IS COLDEST |
The temperature controls are preset in the factory at 5 for both the refrigerator and freezer compartments. Allow 24 hours for the temperature to stabilize to the preset recommended settings.
Several adjustments may be required. Each time you adjust controls, allow 24 hours for the refrigerator to reach the setting you have selected.
Setting either or both controls to 0 stops cooling in both the freezer and refrigerator compartments, but does not shut off electrical power to the refrigerator.
Control settings will vary based on personal preferences, usage and operating conditions and may require more than one adjustment.
NOTE: The refrigerator is shipped with protective film covering the temperature controls. If this film was not removed during installation, remove it now.
Performance Air Flow System
The Performance Air Flow System is designed to maximize temperature control in the refrigerator and freezer compartments. This unique special feature consists of the Air Tower along the back wall of the refrigerator and the Air Tunnel on the bottom portion of the freezer rear wall. Placing food in front of the louvers on these components will not affect performance. Although the Air Tower and the Air Tunnel can be removed, doing so will affect temperature performance. (For removal instructions,
5
Safety Instructions Operating Instructions Installation Instructions Troubleshooting Tips Consumer Support