About the water filter. on some models, Safety

About the water filter. (on some models)	GEAppliances.com
On some models

Safety

Cartridge

Holder

Place the top of the cartridge up inside the cartridge holder and slowly turn it to the right.

Filter Bypass Plug

Water Filter Cartridge

The water filter cartridge is located in the back upper right corner of the refrigerator compartment.

When to Replace the Filter

There is a replacement indicator light for the water filter cartridge on the dispenser. This light will turn orange to tell you that you need to replace the filter soon.

The filter cartridge should be replaced when the replacement indicator light turns red or if the flow of water to the dispenser or icemaker decreases.

Installing the Filter Cartridge

If you are replacing the cartridge, first remove the old one by slowly turning it to the left. Do not pull down on the cartridge. A small amount of water may drip down.

Fill the replacement cartridge with water from the tap to allow for better flow from the dispenser immediately after installation.

Lining up the arrow on the cartridge and the cartridge holder, place the top of the new cartridge up inside the holder. Do not push it up into the holder.

Slowly turn it to the right until the filter cartridge stops. DO NOT OVERTIGHTEN. As you turn the cartridge, it will automatically raise itself into position. Cartridge will rotate about 1/4 turn.

Run water from the dispenser for 3 minutes (about one and a half gallons) to clear the system and prevent sputtering.

Press and hold the RESET WATER FILTER pad on the dispenser for 3 seconds.

NOTE: A newly-installed water filter cartridge may cause water to spurt from the dispenser.

Filter Bypass Plug

You must use the filter bypass plug

when a replacement filter cartridge is not available. The dispenser and the icemaker will not operate without the filter or filter bypass plug.

Replacement Filters:

To order additional filter cartridges

in the United States, visit our Website, GEAppliances.com, or call GE Parts and Accessories, 800.626.2002.

GWF

Suggested Retail $34.95 USD

Customers in Canada should consult the yellow pages for the nearest Camco Service Center.

Instructions Operating Instructions Installation Instructions Troubleshooting Tips Consumer Support

23, 25 specifications

The GE 23 and GE 25 are groundbreaking gas turbine models developed by General Electric, targeting the rapidly evolving energy market with high efficiency and reliability. Both models are integral components of GE’s gas turbine portfolio, designed specifically for a broad range of applications, including power generation and industrial use.

The GE 23 is characterized by its compact design, making it suitable for both small-scale and large-scale applications. With a power output ranging from 23 to 30 megawatts, the GE 23 is equipped with advanced aerodynamics and combustion technologies that significantly enhance its overall performance. One of the standout features of the GE 23 is its ability to offer flexible operation, allowing it to adapt to changing energy demands while minimizing emissions. This flexibility is facilitated by its advanced control systems that ensure optimal performance in varying operational conditions.

In contrast, the GE 25 is designed for larger-scale power generation, delivering outputs of up to 30 megawatts. This model incorporates the latest advancements in material science, providing improved durability and operational lifespan. The GE 25 utilizes high-efficiency blades made from advanced alloys that can withstand extreme temperatures, contributing to improved thermal efficiency. Moreover, the GE 25 features advanced digital controls and monitoring systems, enabling real-time performance optimization and predictive maintenance.

Both turbines employ advanced combustion technology to achieve reduced NOx emissions, aligning with environmental regulations and sustainability goals. These technologies are complemented by GE’s commitment to integrating renewable energy sources into the power grid, enhancing the flexibility of operations.

The GE 23 and GE 25 boast remarkable reliability and lower operational costs, attributed to their simplified maintenance processes and robust design. They are equipped with modular components that facilitate easier serviceability, enabling operators to minimize downtime and optimize their power generation capabilities.

Additionally, the incorporation of advanced digital analytics into both models allows for enhanced performance tracking and system diagnostics, ensuring that operators can maximize efficiency and mitigate risks.

In conclusion, the GE 23 and GE 25 represent the pinnacle of gas turbine technology, combining efficiency, flexibility, and reliability. Their innovative features and commitment to sustainability make them formidable choices for power generation in the modern energy landscape. As global energy demands continue to rise, these models are poised to play a vital role in shaping the future of energy production.