Alto-Shaam 1020ESG, 1218ESG, 1010ESG, 714ESG, 2020ESG, 610ESG Original Equipment Limited Warranty

Page 32

ORIGINAL EQUIPMENT LIMITED WARRANTY

Alto-Shaam, Inc. warrants to the original purchaser that any original part that is found to be defective in material or workmanship will, at Alto-Shaam’s option, subject to provisions hereinafter stated, be replaced with a new or rebuilt part.

The labor warranty remains in effect one (1) year from installation or fifteen (15) months from the shipping date, whichever occurs first. Alto-Shaam will bear normal labor charges performed by an authorized Alto-Shaam service agent during standard business hours, and excluding overtime, holiday rates or any additional fees.

The parts warranty remains in effect for one (1) year from installation or fifteen (15) months from the shipping date, whichever occurs first.

THIS WARRANTY DOES NOT APPLY TO:

1.Replacement of light bulbs, door gaskets, and/or the replacement of glass due to damage of any kind.

2.Equipment damage caused by accident, shipping, improper installation or alteration.

3.Steam generator or steam generating system damage as a result of inadequate routine maintenance and cleaning. Required maintenance and cleaning of steam generating equipment is the responsibility of the owner/operator.

4.Equipment used under conditions of abuse, misuse, carelessness or abnormal conditions including, but not limited to, equipment subjected to harsh or inappropriate chemicals including, but not limited to, compounds containing chlorine, chlorides or quaternary salts, or equipment with missing or altered serial numbers.

5.Equipment that uses water must meet Alto-Shaam’s minimum water quality standards as shown below.

USE OF WATER NOT MEETING ALTO-SHAAM’S MINIMUM WATER QUALITY STANDARDS WILL VOID THIS WARRANTY.

Water quality and required maintenance of steam generating equipment is the responsibility of the owner/operator. The installation and use of Alto-Shaam’s CombiGuard™ Water Filtration System is highly recommended.

ALTO-SHAAM COMBITHERM WATER QUALITY MINIMUM STANDARDS

CONTAMINANT

INLET WATER REQUIREMENTS (UNTREATED WATER)

Free Chlorine

Less than 0.1 ppm (mg\L)

 

 

Hardness

Less than 3 gpg (52 ppm)

 

 

Chloride

Less than 30 ppm (mg\L)

 

 

pH

7.0 to 8.5

 

 

Alkalinity

Less than 50 ppm (mg\L)

 

 

Silica

Less than 12 ppm (mg\L)

 

 

Total Dissolved Solids (tds)

Less than 60 ppm

6.Damage caused by use of any cleaning agent other than Alto-Shaam’s Combitherm® Oven Cleaner including, but not limited to, damage due to chlorine, bleach, quaternary salts, scouring powders or other harmful chemicals. Use of Alto-Shaam’s Combitherm Cleaner on Combitherm ovens is highly recommended.

7.Any losses or damage resulting from malfunction, including loss of product or other consequential or incidental damages of any kind.

8.Equipment modified in any manner from original model, substitution of parts other than factory authorized parts, removal of any parts including legs, or addition of any parts.

THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ALTO-SHAAM BE LIABLE FOR LOSS OF USE, LOSS OF REVENUE OR PROFIT, OR LOSS OF PRODUCT, OR FOR ANY INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES.

No person except an officer of Alto-Shaam, Inc. is authorized to modify this warranty or to incur on behalf of Alto-Shaam any other obligation or liability in connection with Alto-Shaam equipment.

Warranty effective September 1, 2010

COMBITOUCHTM ESG SERIES • GAS INSTALLATION MANUAL • 30.

Image 32
Contents ES GAS Installation L I V E R Y P a C K I N GSafety Procedures Precautions N G E RVentilation Requirements Site InstallationInstallation Codes & Standards Positioning on Site 102mmPositioning Pins Positioning RequirementsCommon Specifications Scale Free CE-27889610ESG 610ESG / sk Dimensions H x W x D610ESG 1010ESG 1010ESG / sk 1010ESGContaminant Inlet Water Requirements untreated water 714ESG 714ESG 714ESG / sk240 lb 109 kg Maximum Volume Maximum 150 quarts 190 liters 1020ESG33-7/8 x 25-1/4 x 33-7/8 860mm x 640mm x 860mm 1020ESG 1020ESG / sk1218ESG 1218ESG 1218ESG / sk2020ESG 2020ESG 2020ESG / skElectrical Electrical Grounding InstructionsMobile Equipment Restraint Risk of Electric ShockVentilation Requirements GAS Supply & Installation Natural GasPropane Gas Approved, commercial type and at least 3/4 I.DAccordance with local codes, CAN/CGA-B149.1 GAS Piping Must Never Be Installed to RUN Under the Burner Leak Testing Never USE AN Open Flame to Leak Test GAS ExhaustWater Supply & Installation CombiGuard FI-23014 shown Install water intake filtersCan manifold off of one 3/4 line 38mmto Water ValveWater Drainage Combitouch Checklist E02 E03E04 E11E15 E20E21 E22E36 E51E93 CombiTouch Motor Control Error Codes Type of Error Indication Release of ErrorError Codes ESIOriginal Equipment Limited Warranty Transportation Damage and Claims
Related manuals
Manual 36 pages 7.25 Kb

610ESG, 2020ESG, 714ESG, 1020ESG, 1010ESG specifications

Alto-Shaam is a leading manufacturer of innovative cooking equipment, renowned for its commitment to quality and efficiency. Among its impressive lineup, the 1218ESG, 1010ESG, 1020ESG, 714ESG, and 2020ESG models stand out for their versatility and advanced technology, catering to the needs of modern kitchens.

The Alto-Shaam 1218ESG is a compact yet powerful solution designed specifically for high-volume cooking. Its key features include a unique Halo Heat technology that ensures even heat distribution, eliminating the need for fans or excessive airflow. This technology maintains the food's moisture and quality, making it ideal for holding, cooking, and reheating a variety of dishes. Additionally, the 1218ESG offers touchscreen controls, allowing for easy operation and programming, as well as a wide temperature range to accommodate various cooking requirements.

Similarly, the 1010ESG is engineered for efficiency in smaller spaces without sacrificing performance. It shares the same Halo Heat technology, paired with a space-saving design. The 1010ESG features a user-friendly interface and is equipped with programmable settings, making it easy to replicate dishes consistently. Its versatility allows it to handle everything from baked goods to meats, ensuring that culinary professionals can meet diverse menu demands.

The 1020ESG, on the other hand, expands on the capabilities of the 1010ESG while maintaining a compact profile. With a slightly larger cooking chamber, it allows for more substantial portions. Users can benefit from advanced features such as programmable recipes, which streamline operations in busy kitchens. The consistent cooking performance of the 1020ESG ensures that food retains its flavor and visual appeal, enhancing the dining experience.

For those requiring a larger capacity, the Alto-Shaam 714ESG and 2020ESG models provide exceptional solutions. The 714ESG is designed for heavy-duty use, making it suitable for larger batches and high-volume operations. It includes multiple cooking racks and robust construction, providing reliability and durability in high-pressure environments.

The 2020ESG takes it a step further with its extensive features tailored for extensive food service operations. Offering advanced technology and high capacity, it is aimed at large-scale kitchens where efficiency and consistency are paramount. All these models benefit from the patented Halo Heat technology, ensuring that each dish is cooked evenly and served at the perfect temperature.

In summary, the Alto-Shaam 1218ESG, 1010ESG, 1020ESG, 714ESG, and 2020ESG represent a perfect blend of technology, reliability, and versatility. They cater to a wide range of culinary needs while ensuring the quality and consistency that food service professionals demand. With their user-friendly interfaces and innovative cooking solutions, these models continue to set the standard in the commercial cooking equipment industry.