Alto-Shaam 610ESG Site Installation, Installation Codes & Standards, Ventilation Requirements

Page 5

INSTALLATION

SITE INSTALLATION

D A N G E R

IMPROPER INSTALLATION,

ALTERATION, ADJUSTMENT, SERVICE, OR MAINTENANCE COULD RESULT IN SEVERE INJURY, DEATH, OR CAUSE PROPERTY DAMAGE.

READ THE INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS THOROUGHLY BEFORE INSTALLING OR SERVICING THIS EQUIPMENT.

D A N G E R

AVERTISSEMENT : UNE INSTALLATION, UN AJUSTEMENT, UNE ALTÉRATION, UN SERVICE OU UN ENTRETIEN NON CONFORME AUX NORMES PEUT CAUSER DES DOMMAGES À LA PROPRIÉTÉ, DES BLESSURES OU LA MORT.

LIRE ATTENTIVEMENT LES DIRECTIVES D’OPÉRATION ET D’ENTRETIEN AVANT DE FAIRE L’INSTALLATION, OU L’ENTRETIEN DE CET ÉQUIPEMENT.

INSTALLATION CODES & STANDARDS

The following codes and standards are required for installation of this oven:

AIR SUPPLY, ELECTRICAL CONNECTIONS, WATER CONNECTIONS, AND WASTE WATER DISCHARGE.

Installation must comply with local codes required for gas appliances. In the absence of local codes, installation must comply with the National Fuel Gas Code, ANSI Z223.1 (latest edition). In Canada, the appropriate code is the Natural Gas Installation Code, CAN/CGA-B149.1 or the Propane Installation Code, CAN/CGA-B. Adherence to code by a qualified installer is essential for the following: Gas Plumbing, Gas Appliance Installation, Commercial Cooking Ventilation, Water and Plumbing, and OSHA Regulations.

VENTILATION REQUIREMENTS

A steam ventilation hood is mandatory for the operation of the oven. The ventilation hood must be installed in accordance with local building codes for the steam exhaust and must protrude 12-inches to 20-inches (300 to 500mm) over the front side

of the oven. A grease filter must be located in the protruding area of the hood. Grease filters should be thoroughly cleaned on a regular basis following manufacturer’s instruction. Ventilation hoods must ensure an adequate amount of incoming air during operation and must be operated whenever the combination oven/steamer is used in order to avoid the accumulation of condensation in the hood area. See the section titled Gas Exhaust.

CAUTION

THE OVEN MUST REMAIN ON THE

PALLET WHILE BEING MOVED TO THE INSTALLATION SITE BY FORK LIFT OR PALLET LIFT TRUCK.

NOTE: Note dimensions required for doorways and aisles for access of the oven and pallet to the installation site. Transport the oven in an upright and level position only. Do not tilt the oven.

COMBITOUCHTM ESG SERIES • GAS INSTALLATION MANUAL • 3.

Image 5
Contents ES GAS Installation P a C K I N G L I V E R YN G E R Safety Procedures PrecautionsVentilation Requirements Site InstallationInstallation Codes & Standards 102mm Positioning on SitePositioning Requirements Positioning PinsScale Free CE-27889 Common Specifications610ESG 610ESG / sk Dimensions H x W x D610ESG 1010ESG 1010ESG / sk 1010ESGContaminant Inlet Water Requirements untreated water 714ESG 714ESG / sk 714ESG1020ESG 240 lb 109 kg Maximum Volume Maximum 150 quarts 190 liters33-7/8 x 25-1/4 x 33-7/8 860mm x 640mm x 860mm 1020ESG 1020ESG / sk1218ESG 1218ESG / sk 1218ESG2020ESG 2020ESG / sk 2020ESGElectrical Grounding Instructions ElectricalRisk of Electric Shock Mobile Equipment RestraintVentilation Requirements Natural Gas GAS Supply & InstallationPropane Gas Approved, commercial type and at least 3/4 I.DAccordance with local codes, CAN/CGA-B149.1 GAS Piping Must Never Be Installed to RUN Under the Burner Never USE AN Open Flame to Leak Test GAS Exhaust Leak TestingWater Supply & Installation CombiGuard FI-23014 shown Install water intake filtersCan manifold off of one 3/4 line 38mmto Water ValveWater Drainage Combitouch Checklist E03 E02E04 E11E20 E15E21 E22E51 E36E93 Type of Error Indication Release of Error CombiTouch Motor Control Error CodesESI Error CodesOriginal Equipment Limited Warranty Transportation Damage and Claims
Related manuals
Manual 36 pages 7.25 Kb

610ESG, 2020ESG, 714ESG, 1020ESG, 1010ESG specifications

Alto-Shaam is a leading manufacturer of innovative cooking equipment, renowned for its commitment to quality and efficiency. Among its impressive lineup, the 1218ESG, 1010ESG, 1020ESG, 714ESG, and 2020ESG models stand out for their versatility and advanced technology, catering to the needs of modern kitchens.

The Alto-Shaam 1218ESG is a compact yet powerful solution designed specifically for high-volume cooking. Its key features include a unique Halo Heat technology that ensures even heat distribution, eliminating the need for fans or excessive airflow. This technology maintains the food's moisture and quality, making it ideal for holding, cooking, and reheating a variety of dishes. Additionally, the 1218ESG offers touchscreen controls, allowing for easy operation and programming, as well as a wide temperature range to accommodate various cooking requirements.

Similarly, the 1010ESG is engineered for efficiency in smaller spaces without sacrificing performance. It shares the same Halo Heat technology, paired with a space-saving design. The 1010ESG features a user-friendly interface and is equipped with programmable settings, making it easy to replicate dishes consistently. Its versatility allows it to handle everything from baked goods to meats, ensuring that culinary professionals can meet diverse menu demands.

The 1020ESG, on the other hand, expands on the capabilities of the 1010ESG while maintaining a compact profile. With a slightly larger cooking chamber, it allows for more substantial portions. Users can benefit from advanced features such as programmable recipes, which streamline operations in busy kitchens. The consistent cooking performance of the 1020ESG ensures that food retains its flavor and visual appeal, enhancing the dining experience.

For those requiring a larger capacity, the Alto-Shaam 714ESG and 2020ESG models provide exceptional solutions. The 714ESG is designed for heavy-duty use, making it suitable for larger batches and high-volume operations. It includes multiple cooking racks and robust construction, providing reliability and durability in high-pressure environments.

The 2020ESG takes it a step further with its extensive features tailored for extensive food service operations. Offering advanced technology and high capacity, it is aimed at large-scale kitchens where efficiency and consistency are paramount. All these models benefit from the patented Halo Heat technology, ensuring that each dish is cooked evenly and served at the perfect temperature.

In summary, the Alto-Shaam 1218ESG, 1010ESG, 1020ESG, 714ESG, and 2020ESG represent a perfect blend of technology, reliability, and versatility. They cater to a wide range of culinary needs while ensuring the quality and consistency that food service professionals demand. With their user-friendly interfaces and innovative cooking solutions, these models continue to set the standard in the commercial cooking equipment industry.