![](/images/new-backgrounds/1080184/8018495x1.webp)
Section 3 - Service and Repair
This allows calibration of the sensor to cabinet for abnormal operations. By adjusting this number colder you can change the average cabinet temperature to a colder value. Not available on CLR2160.
11.Data download
Along with the separate ESPY software you can download the rolling data file.
12.Clear error log
Perform this operation after checking the errors.
13.Clear download memory
Clears the rolling data file if desired.
14.Model number displayed
Displays the
15.Adjust thermistor 1 differential
This number should not be adjusted. Not available on
CLR2160.
16.Adjust thermistor 2 offset
This allows calibration of the sensor to cabinet for abnormal operations. By adjusting this number colder you can change the average cabinet temperature to a colder value. Not available on 2175RF.
17.Adjust thermistor 3 offset
This allows calibration of the sensor to cabinet for abnormal operations. By adjusting this number colder you can change the average cabinet temperature to a colder value. Not available on Rs, WCs or CLR2160.
18.Adjust thermistor 4 offset
This allows calibration of the sensor to cabinet for abnormal operations. By adjusting this number colder you can change the average cabinet temperature to a colder value. Not available on Rs or WCs.
19.Thermistor 2 status
This will show the pure thermistor reading with no offsets taken into account. When placed in ice water this thermistor should read 32°F in this menu option. Not available on 2175RF.
20.Thermistor 3 status
This will show the pure thermistor reading with no offsets taken into account. When placed in ice water this thermistor should read 32°F in this menu option. Not available on Rs,
WCs or CLR2160.
21.Thermistor 4 status
This will show the pure thermistor reading with no offsets taken into account. When placed in ice water this thermistor should read 32°F in this menu option. Not available on Rs,
WCs or CLR2160.
22.Automatic toggle through relays switch on and off See specific unit section for description.
23.Defrost interval adjust. 3 to 24 hours
This will adjust the interval between defrosts from 3 to 24 hours. Adjusting from the factory settings may cause undesired temperature in the refrigerator section.
24.Adjust thermistor 2
25.Adjust thermistor 3
26.Adjust thermistor 4
27.Show software revision
This will toggle between main and display board software revision. The main board number will be accompanied by the degree symbol.
Error Codes
E1 Thermistor 1 is open. Not available on CLR2160.