WhisperKool 5000TIR owner manual Standard Controller Functions XR70CX, Button Normal Functions

Page 25

STANDARD CONTROLLER FUNCTIONS - XR70CX

If your unit is installed through the wall and does not have a remote keypad you will have the XR70CX Controller.

Button

Normal Functions

ON/OFF

• The ON/OFF button allows the customer the convenience of turning the refrigera-

 

tion system ON or OFF, from the control panel. This feature does not disconnect

 

power from the unit. In order for the power to be shut off from the unit, the power

 

cord must be unplugged from the wall receptacle.

 

• Press the ON/OFF button once for button application.

Up and Down

• Use these buttons to scroll up or down the CPSM (Customer Preference Selection

Arrows

Mode) menu.

 

• Displays the Highest and Lowest temperature sensed by the Bottle Probe. This

 

feature allows the customer instant access to the recorded data applicable to the

 

Bottle Probe Temperatures, it can be easily reset to reflect current temperatures.

 

1. Press the “UP” arrow, or the “Down” arrow once, and the Highest or Lowest Tempera-

 

ture (Hi/Lo) sensed by the Bottle Probe, will be displayed.

 

2. To reset the Hi/Lo, press and hold the “Set” button when the Hi/Lo value is displayed

 

on the Digital Display, continue to hold the “Set” button until “rst” appears on the

 

digital display and then blinks. This will erase the past recorded “Temperature Data

 

History” and start recording, from the current time and temperature, forward. Tem-

 

peratures displayed would reflect Bottle Probe Temperatures from that point in time,

 

and beyond.

 

3. The Hi/Lo feature should be reset at initial “Start-Up” and after the Cellar or Cabinet

 

has obtained normal operating temperatures, which is generally 55°F.

Cellar PreChill (CPC)

The CPC Feature is activated by pressing the Up button for 3-5 seconds, and the CPC

 

logo will be displayed on the digital display. The CPC feature can be terminated by

 

pressing the Up button for 3-5 seconds, or the feature will self terminate after 6 hrs.

 

1. The (CPC) Feature may be used to Pre-Chill the Cellar prior to loading it with Warm

 

Product. The feature will shift the Set Point down to a lower setting of 52°F, for the

 

next 6 hours. After the 6 hour time period, the Set Point will automatically return to

 

the original Set Point.

 

2. The CPC feature can be conveniently adjusted to the customer’s specific needs, by

 

accessing the “Customer Preference Select Mode” (CPSM). See Customer Preference

 

Select Mode Instructions.

Page 25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents For 5000ti 5000tiR PT-EXPL5000 Table of Contents Whisperkool Series Quick Reference Guide Standard Controller Layout XR70CX Quick Controller Reference GuideFAN Speed Reference Unit SpecificationIntroduction Customer ServiceReview the Packing Slip to Verify Contents Customer Warranty RegistrationCheck the Box for the following contents Receiving & Inspecting the UnitQuick Start Guide Wall & Ceiling Framing Preparing the Wine CellarInsulation Vapor BarrierMounting the Unit Air Intake Cellar Wall Exhaust FanSizing the Unit to the Room Frame the hole with two-by-four supports Electrical Inlets InstallationApplying Insulation Tape Mounting Bracket InstallationLiquid Measuring Thermostat System Placement of UnitLocation of Supply and Return Grilles Do notDrain Line Condensation Drain Line TubeExterior Grille Installation Installation OptionsTo Use the thermostat Liquid Measuring Thermostat SystemRemote Controller Installation and Configuration Connection wire in Side Mount configuration Multi Speed Control System Operation Button Normal Functions Standard Controller Functions XR70CXEnergy Reduction Alarm Codes Standard Wire Schematic XR70CX Temperature Remote Controller Functions XW260KBlink, confirming the change in Set Point Cpsm Mode Remote Wire Schematic XW260K Maintenance Schedule Cellar Temperature is to Warm Possible Cause Solution Unit does not run/power up Possible Cause SolutionUnit runs but does not cool Possible Cause Solution Unit leaks water Possible Cause SolutionPossible Cause Solution Compressor short cycles Possible Cause SolutionContact WhisperKOOL Customer Service Accessories for Cooling UnitsTechnical Assistance Condensate Pump KitWhisperKOOL Cooling System Installation Terms and ConditionsProduct Installation Requirements Sales and USE TAX Installed by DatePage Page WhisperKOOL
Top Page Image Contents