Smeg A4-5 manual Installing the Appliance, Positioning and levelling the appliance

Page 4

Instructions for the Installer

2.INSTALLING THE APPLIANCE

Installation must be carried out by a qualified engineer in compliance with the relevant regulations.

It may be installed against walls one of which is higher than the worktop surface, at least 50 mm from the side of the appliance, as shown in the installation class drawings A and B. Wall units or extractor hoods installed above the appliance's work-top must be at least 750 mm above it.

A	B
Built-in Appliance	Free-Standing Installation

2.1 Positioning and levelling the appliance

The appliance is equipped with wheels and adjustable feet to simplify the positioning procedure. To use the front wheels, screw in the foot as shown here, so that the appliance rests on the front wheels. However, to allow the appliance to be moved freely it must be lifted at the back. To do this, proceed as follows:

use a 10 socket wrench to screw in the 2 hex nuts underneath the oven compartment: this raises the appliance either to level it or to allow it to be moved around.

Once all procedures are complete, retighten the front feet and the hex nuts to set the cooker stable and level.

46

Image 4

Contents Table of Contents Precautions for Safety and USE PresentationNameplate Must Never be Removed Installing the Appliance Positioning and levelling the applianceElectrical connection This nameplate must never be removedInstructions for the Installer Ventilation requirements 4Connecting to natural and LPG gas Please see connectionInstruction for wall fixing only on some models Adaptation to Different Types of GAS Changing nozzlesBurner and nozzle characteristics table Hob burner layoutLPG G30/G31 28/37 mbar Natural GAS G20 20 mbarAdjusting the minimum setting for town gas and natural gas Adjusting the minimum for bottled gasFinal Operations Fitting the rear splash-backFront panel Description of ControlsLEFT-HAND Oven Thermostat Knob LEFT-HAND Oven Function Selector Knob Barbecue Element Power Regulator KnobHOB Burner Control Knob RIGHT-HAND Oven Thermostat Knob RIGHT-HAND Oven Function Selector KnobElectronic Analogue Clock Setting the timeList of Functions Minute-Minder Programming Demo Function Using the HOB Lighting the hob burnersUsing the Ovens Practical hints for using the hob burnersUsing the barbecue griddle Precautions and General AdviceCooling fan system Oven lightStorage compartment Using the Pizza Function Precautions for using the pizza plateTo save energy Accessories Available Optional accessories Cooking Advice Conventional cooking left/right ovenFunction Selector Thermostat AT Maximum Setting Hot air cooking left-hand ovenGrilling left/right oven Function Selector Thermostat SET AT 50 250CDefrosting left-hand oven Hot-air grilling left/right ovenFunction Selector Thermostat SET on Rotisserie cooking left-hand oven Function Selector Thermostat SET AT 50 -200CConventional Cooking Recommended cooking tablesHOT-AIR Cooking Cleaning and Maintenance Cleaning stainless steelRoutine daily cleaning Food stains or spillsCleaning the hob components Barbecue griddle plateBasin Pan standsCleaning the ovens without self-cleaning liners Plugs and thermocouplesUsing the self-cleaning liners Maintenance of self-cleaning linersRemoving the self-cleaning liners Oven liners main ovenDoor glazing Cleaning the oven bottom right-hand ovenPizza plate must be washed separately Instructions for the User Extraordinary Maintenance Changing the light bulbsOven door gaskets Removing the doorGreasing the gas taps