Instructions for the User
Starting cooking: as well as setting a cooking duration, the cooking start time can also be set (with a maximum delay of 12 hours from the current time). To set the cooking start/end time, proceed as follows:
-Set the cooking duration as described in the previous point.
-Within 6/7 seconds of the last pressure on the 
or 
keys, press
the 
key again to set the cooking start time. The current time will
appear on the display with internal segments illuminated to show the
end of cooking time. Use the 
and 
keys to set the cooking start time.
-6/7 seconds after the last key is pressed, the display will show the current time and the cooking start and end times, which will be represented by the illuminated inside segments. The display segments will be constantly illuminated as long as the current time is not the same as the cooking start time; as soon as the current time reaches the set starting time, all the inside segments will start to flash, indicating that the oven has started cooking.
-At the end of the cooking time the timer will switch the oven heating elements off, the beeps will start to sound and the numbers on the dial will flash.
-To reset the whole program set, keep the central key 
pressed for 1 or 2 seconds: if cooking has already started, the oven will have to be switched off by hand.
-Here we can see a programming example: the current time is 7:06 and cooking is programmed to start at 8:00 and end at 9:00.
-At 8 o'clock the inside segments between 8 and 9 will start to flash, while the hours hand will remain still.
Caution: for the oven to start cooking operations after the programming procedures just described, the thermostat and function selector knob must correctly set on the temperature and function required.
5.2.4 "DEMO" Function
Models with analogue/digital programmer feature a "DEMO" function which deactivates the heating elements while leaving the other functions
unchanged. To activate it, simply press the 
, 
, and 
keys for 3/4 seconds. A confirmation beep will inform the user that the function is active. To deactivate it, simply repeat the same procedure.
59