Secure the bottom of the duct with 2 - 4 x 8 mm screws.
Complete Installation
1. For
2. Install metal filters. See the “Range Hood Care” section.
3. Check the operation of the range hood blower and light. See the “Range Hood Use” section.
NOTE: To get the most efficient use from your new range hood, read the “Range Hood Use” section.
RANGE HOOD USE
The range hood is designed to remove smoke, cooking vapors and odors from the cooktop area. For best results, start the hood before cooking and allow it to operate several minutes after the cooking is complete to clear all smoke and odors from the kitchen.
The hood controls are located on the front side of the canopy.
A
B
C
Range Hood Controls
A B C D E
A. On/Off light button B. Blower Off button
C. Blower speed minimum button D. Blower speed medium button E. Blower speed maximum button
D
H 
G F E
A. Duct cover holes B. Duct cover
C. Control panel D. Glass canopy E. Grease filter F. Lamp cover
G. Incandescent lamp (position and number of lamps may vary) H. Grease filter release handle
Operating the light
The On/Off light button controls both lights. Press once for On and again for Off.
Operating the blower
The Blower Speed buttons turn the blower on and control the blower speed and sound level for quiet operation. The speed can be changed anytime during fan operation by pressing the desired Blower Speed button.
The Blower Off button turns the blower Off.
10