CARE & CLEANING
Glass parts
FACIA PANEL, DOOR PANELS
Use a mild cream cleaner - eg; “Cif”. Rinse thoroughly and dry with a soft cloth.
Important: The inner door glass panel(s) can be removed for cleaning, but they must be replaced the right way (so the reflective side faces inwards) and also pushed fully in to the stop position. To remove the glass panel, open the door wide, hold the edges of the glass and slide out.
Painted, plastic and metal finish parts (if fitted)
CONTROL KNOBS, DOOR HANDLES
Only use a clean cloth wrung out in hot soapy water.
Chrome plated parts
OVEN SHELVES & OVEN SHELF RUNNERS,
GRILL PAN TRIVET
Do not use abrasives or polishes, use a moist soap pad - eg; “Brillo”.
Note: Oven shelf runners can be removed for cleaning. Grasp the runners, and slide out of the hanging holes as shown.
Note: These items may also be cleaned in a dishwasher.
Stainless Steel surfaces (stainless steel finish models only)
HANDLES, DOOR PANELS
Only use a clean cloth wrung out in hot soapy water, and dry with a soft cloth.
Do not use undiluted bleach or any products containing chlorides as they can permanently damage the steel.
Extra care should be taken when cook- ing food in salted water. Some foods are corrosive - eg; vinegar, fruit juices and especially salt - they can mark or damage stainless steel if they are left on the surface. Turn off and wipe any spillage immediately, taking care to avoid skin contact with any hot surface or spillage.
Sharp objects can mark the surface of stainless steel, but marks will become less noticeable with time.
To maintain the finish of the stainless steel, or to remove any greasy marks, wipe the stainless steel surface sparingly with a minimum amount of Baby Oil and kitchen paper.
Do not use cooking oils, as these may contain salt, which can damage the stainless steel surface.
Pull out to clean
41