Fig. 24 | DESN 512407 B |
B.TO REMOVE SIDE PANELS
1.Isolate from electric supply.
2.Proceed as ‘TO REMOVE HOTPLATE CASTINGS’.
3.Lower the cooker onto the rollers by turning the adjusting feet fully
4.Roll the cooker slightly forward, unhook the safety chain and disconnect the flexible hose.
5.Remove rear fixing screws (3) and slide side panel back and out.
6.
C.TO REMOVE FACIA CASTINGS
1.Isolate from electric supply.
2.Proceed as ‘TO REMOVE HOTPLATE CASTINGS’.
3.Pull off control knobs.
4.Remove control panel fixing screws (4 per casting) (See Fig. 25). When removing the screws support the casting.
NOTE: When removing the castings, the oven indicator neons require disconnecting from the facia, hold the cables at their entry into the neon twist and pull, this will disengage the neon assembly. Be careful when
Fig. 25 | DESN 512400 A |
51