TO FIT PAN SUPPORTS
Fit the pan supports in the following order. The pan supports are marked on the underside to correspond to the markings below. The pan supports must locate in the recesses in the hotplate casting.
Fig. 13A | DESN 513712 A |
Important
It is very important for the performance and reliability of the hob that the pan supports are fitted in accordance with the AGA
To help identify the correct location of the pan supports, the centre rear pan support has been uniquely designed with tag, as shown. This pan support must be fitted in the rear centre position with the tag pointing towards the back of the appliance.
Fig. 13B | DESN 512995 A |
|
|
26