5.If the electrical outlet for the ice maker is behind the cabinet, plug in the ice maker.
6.Push the ice maker into position.
7.Seal all around the cabinet to the floor with an approved caulking compound.
OPERATION
Final Check List before Operation
1.Have all packing materials and tape been removed from the interior and exterior of the ice maker?
2.Did you clean the ice storage bin?
3.Have the installation instructions been followed, including connecting the machine to water, drain and electricity?
4.Has the machine been leveled?
5.Is the ice maker in a site where the ambient temperature is between 13º C (55º F) and 32ºC (90ºF) and the water temperature within 5º C (41º F) and 25º C (77º F) all year round?
6.Has the water supply pressure been checked to ensure a minimum of 20 psig with a static pressure not to exceed 80 psig?
7.Is there a clearance of at least 4 in. (101 mm) at the rear, and 0.6 in. (15 mm) at the sides and top for proper air circulation?
8.Has the power supply voltage been checked or tested against the nameplate rating? And has proper grounding been installed in the ice maker?
9.Is the ice maker plugged in?
10.Did you turn on the main water supply and the tap?
11.Did you check for leaks at all water supply and drainpipe connections?
14