Whirlpool DP940PWS Portable Start-Up Guide, Stopping YourDishwasher, UsingYourNew Dishwasher

2.Properly load the dishwasher. (See “Dishwasher Loading.”) Make sure nothing keeps the spray arm(s) from spinning freely.

3.Add detergent and check the rinse aid dispenser. Add rinse aid if needed. (See “Dishwasher Use.”)

4.Push door firmly closed. The door latches automatically. Run hot water at the sink nearest your dishwasher until the water is hot. (See “Dishwasher Efficiency Tips.”) Turn off water.

5.Select the desired cycle and options. (See “Dishwasher Use.”)

6.Press START/RESUME.

Stopping YourDishwasher

You can stop your dishwasher anytime during a cycle.

1.Open the door slightly.

2.Wait for the spraying action to stop. Then open the door all the way, if needed.

Close the door to continue the cycle.

OR

Press CANCEL/DRAIN. A 2-minute drain starts.

PORTABLE START-UP GUIDE

Before using your dishwasher, remove all packaging materials. Read this entire Use and Care Guide. You will find important safety information and useful operating tips.

UsingYourNew Dishwasher

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

A power supply of 120 volts, 60 Hz AC, 15 or 20 amps, is required.

1.Plug into a grounded 3 prong outlet.

2.Scrape large food soil and hard items (toothpicks or bones) from dishes.

3.Properly load the dishwasher. (See “Dishwasher Loading.”) Make sure nothing keeps the spray arm(s) from spinning freely.

4.Add detergent and check the rinse aid dispenser. Add rinse aid if needed. (See “Dishwasher Use.”)

5.Push door firmly closed. The door latches automatically. Run hot water at the sink where you will connect dishwasher until water is hot. (See “Dishwasher Efficiency Tips.”) Turn off the water and hook the dishwasher to the faucet. (See “Connecting the Dishwasher.”) Turn on the hot water.

7