Whirlpool DP940PWS Connecting The Dishwasher, ConnectingtheFaucetAdapter, Preparing the faucet

6.Press the desired cycle and option selections. (See “Dishwasher Use.”)

7.Press START/RESUME.

Stopping YourDishwasher

You can stop your dishwasher anytime during a cycle.

1.Open the door slightly.

2.Wait for the spraying action to stop. Then open the door all the way, if needed.

Close the door to continue the cycle.

OR

Press CANCEL/DRAIN. A 2-minute drain starts.

CONNECTING THE DISHWASHER

ConnectingtheFaucetAdapter

NOTE: A special adapter must be installed on the faucet before the dishwasher can be connected. Complete Installation Instructions and the adapter are packed with your dishwasher. (See the Installation Instructions.)

When moving your dishwasher, make sure the door is latched. Hold the dishwasher at the top front corners.

Preparing the faucet

1.Remove the screen holder or aerator, screen, and washer from the end of the faucet.

2.Use the faucet adapter kit that came with your portable dishwasher to modify the faucet where the dishwasher will be used.

NOTE: Remove and save the washer, screen, and screen holder or aerator for future use.

A

B

C

A.Washer

B.Screen

C.Screen holder or aerator

Connecting the faucet adapter to faucets with external threads

Insert the 2 screens and then the thin washer from the faucet adapter kit into the faucet adapter. Attach the adapter onto the end of the faucet.

NOTE: Do not use the thick washer.

A

B

C

A.Thin washer

B.Screens

C.Faucet adapter

Connecting the faucet adapter to faucets with internal threads

Insert the 2 screens, the thin washer, and then the thick washer from the faucet adapter kit into the faucet adapter. Attach the adapter onto the end of the faucet.

NOTE: Use both washers.

A

B

C

D

A.Thick washer

B.Thin washer

C.Screens

D.Faucet adapter

8