DM 2610958399 07-08.qxp 8/6/08 2:15 PM Page 14
FIG. 7
CORRECT: Sand with a smooth back and forth motion, allowing the weight of the tool to do the work.
INCORRECT: Avoid sanding with only the tip of the pad. Keep as much sand paper in touch with the work surface as possible.
CORRECT: Always sand with the pad and sandpaer flat against the work surface. Work smoothly in a back and forth motion.
INCORRECT: Avoid tipping the pad. Always sand flat.
FIG. 8
CORRECT: Always cut with a smooth back and forth motion. Never force the blade. Apply light pressure to guide the tool.
INCORRECT: Do not twist the tool while cutting.This can cause the blade to bind.
CORRECT: Make sure flexible scraper blade flexes enough
INCORRECT: Avoid screw head touching surface with flexible scraper blade.