Dremel 6300 Assembly, Installing and Removing Accessories, Installing and Removing Sanding Sheets

Page 7

DM 2610958399 07-08.qxp 8/6/08 2:15 PM Page 7

Assembly

!WARNING Disconnect the plug from the power source before

making any assembly, adjustments or changing accessories. Such preventive safety measures reduce the risk of starting the tool accidentally.

!WARNING For all work or when changing accessories

always wear protective gloves. Such preventive safety measures reduce the risk of injury from sharp edges of the accessories. Application tools can become very hot while working. Danger of burns!

INSTALLING AND REMOVING

ACCESSORIES

Dremel cutting, scraper blades have a Quick- Fit slot which allows for faster accessory removal compared with other conventional oscillating tool systems.

1.Loosen the clamping screw using the hex key provided just enough so you can slide the accessory between the accessory holder and the blade washer (Fig. 2).

2.Clean accessory holder, accessory and the clamping screw with a clean cloth.

3.Place the accessory onto the accessory holder making sure the accessory engages all 12 pins in the holder and the accessory is flush aganist the accessory holder.

4.Securely tighten the clamping screw with the hex provided (Fig. 3).

NOTE: Some accessories, such as scrapers or blades, may be mounted either straight on the tool, or at an angle to enhance usability (Fig. 4).

INSTALLING AND REMOVING

SANDING SHEETS

Your backing pad uses hook-and-loop backed accessories, which firmly grip the backing pad when applied with moderate pressure.

1.Align the sanding sheet and press it onto the sanding plate by hand.

2.Firmly press the power tool with the sanding sheet against a flat surface and briefly switch the power tool on. This will promote good adhesion and helps to prevent premature wear.

3.To change, merely peel off the old sanding sheet, remove dust from the backing pad if necessary, and press the new sanding sheet in place.

After considerable service the backing pad surface will become worn, and the backing pad must be replaced when it no longer offers a firm grip. If you are experiencing premature wear out of the backing pad facing, decrease the amount of pressure you are applying during operation of the tool.

For maximum use of abrasive, rotate pad 120 degrees when tip of abrasive becomes worn.

FIG. 2

 

CLAMPING

ACCESSORY

SCREW

HOLDER

 

BLADE

WASHER

HEX

ACCESSORYKEY

FIG. 3

CLAMPING

SCREW

HEX KEY

FIG. 4

-7-

Image 7
Contents Ver la página Leer antes de usarFor English Version Version française SeePersonal safety General Power Tool Safety WarningsWork area safety Electrical safetyEdges are less likely to bind and are easier to control Power tool use and careService Many accidents are caused by poorly maintained power toolsSharp Safety Rules for Oscillating ToolsSymbol Name Designation/Explanation SymbolsModel numbe r Functional Description and SpecificationsModel 6300 Multi-Max Oscillating Power Tool Measures reduce the risk of starting the tool accidentallyBlade Washer HEX Accessorykey Clamping Screw HEX KEY AssemblyInstalling and Removing Accessories Installing and Removing Sanding SheetsLearning to USE the Tool IntroductionOperating Instructions Intended USEVariable Speed Control Dial Slide ON/OFF SwitchSwitch Setting Electronic FeedbackUse only Dremel, high-performance accessories Multi-Max Accessory Speed SettingsGrout Removal Operating ApplicationsApplication CuttingMetal, plaster and other ScrapingSanding Grit ApplicationGrinding Selecting Sanding/Grinding SheetsDM 2610958399 07-08.qxp 8/6/08 215 PM Extension Cords Maintenance InformationCleaning Certain cleaning agents ! Caution and solvents damageMM70P Multi-Max AccessoriesMM70W Racine, WI Dremel Limited WarrantyDremel Service Center 4915 21st Street United StatesSécurité électrique Sécurité du lieu de travailSécurité personnelle Entretien Utilisation et entretien des outils ÉlectroportatifsTrès tranchants Consignes de sécurité pour les outils oscillantsLe plomb provenant des peintures à base de plomb Symbole Nom Désignation/Explication Symboles6300 Régime à vide Description fonctionnelle et spécificationsOutil électrique oscillant Multi-Max modèle Numéro de modèleVIS DE Fixation CLÉ Hexagonale Installation ET Retrait DES Feuilles DE Papier AbrasifAssemblage Porte VIS DE FixationUtilisations Prévues Instructions dutilisationApprenez À Vous Servir DE CET Outil Réglage du sélecteur FEED-BACK ÉlectroniqueAcier Coupe Applications pour lemploiEnlèvement DU Coulis Ponçage RaclageMeulage Sélection des feuilles de ponçage/meulageDM 2610958399 07-08.qxp 8/6/08 215 PM ’EXISTE ’INTÉRIEUR Aucune Renseignements sur l’entretienCordons de rallonge NettoyageHCS = Acier à teneur élevée en carbone BiM = bimétallique Accessoire Matériau Application MM11Scarborough, Ont Garantie limitée de DremelÉTATS-UNIS CanadaSeguridad eléctrica Seguridad del área de trabajoSeguridad personal Servicio de ajustes y reparaciones MecánicasNormas de seguridad para herramientas oscilantes De Li-ion SímbolosSímbolo Nombre Designación/explicación Con aislamiento dobleTensión nominal 120 50 60Hz Descripción funcional y especificacionesHerramienta eléctrica oscilante Multi-Max modelo Número de modelo 6300 Velocidad sin cargaTornillo DE Llave Sujeción Hexagonal EnsamblajeUSO Previsto IntroducciónInstrucciones de utilización Gracias por comprar la herramienta Dremel Multi- MaxRetroalimentación Electrónica DeslizanteDura Pintada Ajustes de velocidad de los accesorios Multi-MaxRemoción DE Lechada Aplicaciones de operaciónAplicación CorteLijado RascadoGrano Aplicación Papel de lija blanco Selección de hojas de lija/amoladoAmolado Material AplicaciónDM 2610958399 07-08.qxp 8/6/08 216 PM Escobillas DE Carbono Información de mantenimientoServicio LimpiezaAccesorio Material Aplicación MM11 Accesorios Multi-MaxHCS = Acero rico en carbono BiM =Bimetálica Estados Unidos Garantía limitada de DremelCanadá DM 2610958399 07-08.qxp 8/6/08 216 PM Remarques Notas

6300 specifications

The Dremel 6300 is a versatile rotary tool specifically designed for a wide range of DIY projects and crafts. Known for its compact size and lightweight design, the Dremel 6300 offers exceptional control and precision, making it an ideal choice for both beginners and experienced hobbyists. This innovative tool is part of the Dremel family, a brand synonymous with quality and durability in the realm of rotary tools.

One of the standout features of the Dremel 6300 is its variable speed control. This tool allows users to adjust the rotational speed between 5,000 to 35,000 RPM, facilitating different material handling and project requirements. Whether you are cutting through wood, grinding metal, or polishing delicate surfaces like glass, the ability to fine-tune the speed significantly enhances the tool's versatility.

Equipped with a powerful motor, the Dremel 6300 delivers consistent performance even under heavy use. This motor is engineered with advanced cooling technology that minimizes overheating and ensures longevity. The tool also boasts a flexible shaft attachment, allowing users to work in tight spaces and achieve greater maneuverability on intricate projects.

Dremel's Quick Change Chuck feature is another notable characteristic of the 6300 model. It enables users to change out accessories quickly and conveniently, which is essential for projects requiring multiple attachments. The tool is compatible with a vast array of Dremel attachments and accessories, from cutting and grinding bits to polishing pads and sanding drums, making it a truly versatile tool for any craftsperson.

Moreover, the ergonomic design of the Dremel 6300 provides a comfortable grip during extended use. This emphasis on user comfort ensures that the tool can be used for prolonged periods without causing fatigue. Additionally, the balanced weight distribution enhances stability, giving users more confidence when performing intricate tasks.

In summary, the Dremel 6300 is an excellent rotary tool that combines power, precision, and versatility. With its variable speed control, robust motor, flexible shaft, and user-friendly features, the Dremel 6300 is an essential addition to the toolkit of anyone who enjoys crafting or DIY projects. Whether you are a seasoned professional or just starting, the Dremel 6300 will help unlock your creative potential.