Sherwood R-871 manual Presetting channels, Preset search, Displaying XM information

ENGLISH

Continued

Select the desired channel in the selected category.

3

Presetting channels

•You can store up to 30 preferred channels in the memory.

Select the desired channel with

1 preforming channel search, direct search or category search.

To memorize the channels, perform the

2 steps ② to ④ in "Manual presetting" procedure on page 39.

Preset search

• In the XM mode, select the desired preset channel.

Displaying XM information

•You can display XM information such as channel name, artist name, song title and signal strength.

•In the XM mode,

•Each time the DISPLAY button is pressed, the display mode changes as follows:

→Channel → Artist → Song → Category

name name title

	OFF	←	Signal	←
	(Surround mode		strength
display)

■Note:

•If the information on artist name, song title or category is not available, it will not be displayed correctly.

■Signal strength display mode

•If the reception is poor, you can check the signal strength of the XM radio signal and adjust the position of the XM antenna until "SIGNAL : GOOD" is displayed.

■Error message and status

•If an operation takes longer than usual or an error occurs, one of the following messages may be displayed.

Message	Status
CHECK ANTENNA	The XM antenna is not connected correctly. Check the antenna.
UPDATING	The XM user encryption code is being updated. Please wait.
NO SIGNAL	The signal is too weak. Check the antenna connection and reposition it for the
	best reception.
LOADING	This receiver is tuning or decoding audio or text data. Please wait.
OFF AIR	The selected XM channel is not currently broadcasting. Select another channel.

42