GE DIMENSIoNS and Clearances, For models JGB3000, JGB3001, JGB281, JGB300, JGB400

Installation Instructions

DIMENSIoNS AND CLEARANCES

Provide adequate clearances between the range and adjacent combustible surfaces. These dimensions must be met for safe use of your range. The location of the electrical outlet and pipe opening (see Gas Pipe and Electric outlet Locations) may be adjusted to meet specific requirements.

The range may be placed with 0″ clearance (flush) at the back wall.

Minimum to
cabinets on							Maximum depth
either side of								for cabinets
		30”
the range									above
								countertops
		30”
				1”To wall on either side, standard						13”
			Minimum
	18”				burner models
				2”To wall on either side,
					sealed burner models
									Front edge of
									the range side
									panel forward
					36”		1/4”		from cabinet
						(Minimum)

0”(Minimum)

To cabinets below cooktop and at the range back

For models: JGB3000, JGB3001, JGB281, JGB300, JGB400

	Minimum
	to cabinets			Maximum depth for
	on either side	30”		cabinets above
	of the range
				countertops
	3”	30”	6” Minimum	13”
18”		Minimum
	Minimum		clearance
	clearance		to right wall
	to left wall
				Front edge of the
				range side panel
				forward from
			36”	cabinet
				1/4”
				(Minimum)

0” (Minimum)

To cabinets below cooktop and at the range back

35