Rotel RB-1572 Troubleshooting, Specifications, Front Panel Power Indicator Is Not Lit, No Sound

Page 9

English

9

Troubleshooting

Most difficulties in audio systems are the result of poor or wrong connections, or improper control settings. If you encounter problems, isolate the area of the difficulty, check the control settings, determine the cause of the fault and make the necessary changes. If you are unable to get sound from your amplifier, refer to the suggestions for the following conditions:

Front Panel Power Indicator Is Not Lit

No main power to the amplifier. Check AC power connections at the amplifier and the AC outlet. Check the front panel power switch. Make sure that it is set to the ON position. If using 12V trigger power-on, make sure that a trigger signal is present at rear panel 12V TRIG IN jack.

No Sound

If the amp is getting AC power, but is producing no sound, check the Protection Indicator 2 on the front panel. If lit, see below. If not, check all of your connections and control settings on associated components. Make sure that your input connections and speaker connections match your system configuration.

Protection Indicator Is Lit

The front panel Protection Indicator 2 will light when the amplifier protection circuits have shut off the amplifier. Typically, this occurs only when the amplifier has overheated, when there is faulty speaker wiring, or after a period of extreme use. Turn off the system and wait for the amplifier to cool. Then push the front panel power switch in and out to reset the protection devices. If the problem is not corrected or reoccurs, there is a problem with the system or the amplifier itself.

Specifications

Continuous Power Output (20-20 kHz, < 0.03%, 8 ohms)

RB-1562

100 watts/canal

RB-1572

250 watts/canal

Total Harmonic Distortion (20Hz-20kHz, 8 ohms)

< 0.03 %

Intermodulation Distortion (60 Hz : 7 kHz, 4 :1)

< 0.03 %

Frequency Response (± 1 dB)

 

RB-1562

10 Hz – 40 kHz

RB-1572

10 Hz – 80 kHz

Damping Factor (20 – 20 000 Hz, 8 ohms)

 

RB-1562

200

RB-1572

400

Speaker Impedance

4 ohms minimum

Signal to Noise Ratio (IHF A network)

109 dB

Input Impedance/Sensitivity

 

RB-1562

8.3 k ohms / 1.25V

RB-1572

8.3 k ohms / 1.5V

Gain

 

RB-1562

27.2 dB

RB-1572

27.1 dB

Power Requirements

 

U.S. Version

120 volts, 60 Hz

European Version

230 volts, 50 Hz

Power Consumption

 

RB-1562

130 watts

RB-1572

280 watts

Dimensions (W x H x D)

431 x 99 x 339 mm

 

17 x 4 x 133/8 ins.

Front Panel Height

2U / 88.1 mm / 31/2 ins.

Weight (net)

 

RB-1562

5.6 kg / 12.35 lbs.

RB-1572

7.8 kg / 17.2 lbs

All specifications are accurate at the time of printing.

Rotel reserves the right to make improvements without notice.

Image 9
Contents RB-1562 / RB-1572 Use only accessories specified by the manufacturer Power supply cord or plug has been damagedDo not use this unit near water RB-1562 / RB-1572 ÈÓ‰ÒÓ‰ËÌÂÌË ËÒÚÓ˜ÌËÍÓ‚ Ò˄̇· Ë ‡ÍÛÒÚ˘ÂÒÍËı Òëòúâï Remarques importantes Important NotesWichtige Hinweise Notas ImportantesContents About RotelWord About Watts Getting Started AC Power and ControlSpeaker Connections Input Signal ConnectionsFront Panel Power Indicator Is Not Lit TroubleshootingProtection Indicator Is Lit Specifications’appareil est tombé, ou le coffret est endommagé Remarques importantes concernant la sécuritéSommaire ’indicateur Power de mise sous tension ne s’allume pasAu sujet de Rotel Prise d’alimentation secteurAlimentation secteur et fonctionnement Pour démarrerBranchements des signaux en entrée Polarité et mise en phaseSélection des enceintes Entrée et sortie Trigger 12 voltsSpécifications Problèmes de fonctionnementBranchement des câbles d’enceintes Pas de sonDas Netzkabel oder der Stecker beschädigt sind Benutzen Sie nur vom Hersteller empfohlenes ZubehörDas Gerät Regen ausgesetzt war Das Gerät hingefallen ist bzw. beschädigt wurdeInhaltsverzeichnis Ein Wort zur LeistungsangabeDie Firma Rotel Netzspannung und Bedienung Zu dieser AnleitungAnschließen der Lautsprecher EingangssignalanschlüsseTechnische Daten Bei StörungenDie Betriebsanzeige leuchtet nicht Kein TonEl aparato ha sido golpeado o dañado de algún modo Información Importante Relacionada con la SeguridadAcerca de Rotel ContenidoAlimentación y Control Para EmpezarIndicador Luminoso de Protección Selector del Modo de Conexión/DesconexiónEntrada y Salida para Señal de Disparo de +12 V Ver FiguraSelección de las Cajas Acústicas Conexión de las Cajas AcústicasPolaridad y Puesta en Fase Conexión de las Cajas AcústicasCaracterísticas Técnicas No Hay SonidoEl Indicador de Protección está Activado Características Técnicas Utilizzate esclusivamente accessori indicati dal produttore Importanti informazioni di SicurezzaQuesto simbolo indica che questo prodotto Alcune Parole Sulla Rotel IndiceRidotto Pochissima energia ed offrono un suono perfino miglioreAlimentazione AC e comandi Per CominciareCollegamento dei diffusori IIl LED indicatore Protection è acceso Risoluzione dei problemiCaratteristiche tecniche Nessun suonoRisoluzione dei problemi Als het apparaat in de regen heeft gestaan Belangrijke VeiligheidsinstructiesHoe zit het nou met die Watten? InhoudWij van Rotel Héél belangrijkAan de slag met de RB-1562/1572 Het aansluiten van de ingangen De LuidsprekeruitgangenDe Beveiligingsaanduiding De lichtnetindicator werkt niet Wat te doen bij problemen?De beveiligingsindicator licht op Technische gegevensNätkabeln eller kontakten har skadats Viktiga säkerhetsinstruktionerNågra ord om watt InnehållOm Rotel Miljön samtidigt som de ger ett bättre ljudStröm och strömfunktioner IntroduktionHögtalaranslutningar Anslutningar för insignalerSpecifikationer FelsökningFrontens strömindikator lyser inte Inget ljud hörsВажные инструкции по безопасности Сетевой шнур или штекер был поврежденПрибор побывал под дождем Содержание Компании RotelНесколько слов о мощности в Ваттах Подключение питания и управления Первые шагиПодсоединение акустических систем Технические характеристики Возможные неисправностиНет звука Индикатор защиты светитсяShinsen-Cho Shibuya-Ku Tokyo Japan Concord Street North Reading, MAPhone +1 Fax +1

RB-1572 specifications

The Rotel RB-1572 is a high-performance stereo power amplifier, designed to meet the needs of audiophiles seeking superior sound quality in their music playback systems. This amplifier embodies Rotel's commitment to crafting high-fidelity audio equipment with a focus on performance and value.

One of the key features of the RB-1572 is its robust power output. With 120 watts per channel into 8 ohms and 200 watts per channel into 4 ohms, this amplifier is designed to drive a wide range of speakers with ease. This level of power ensures an immersive listening experience, ample enough to fill large rooms with dynamic and detailed sound.

The RB-1572 utilizes Rotel's proprietary Class AB amplification technology. This technology combines the benefits of both Class A and Class B operation, allowing for high efficiency and low distortion. The result is a smooth and warm sound that preserves the nuances and intricacies of the original recording. Additionally, the amp features a high-capacity power supply, which contributes to its dynamic performance by providing the necessary headroom for transient peaks in music.

Constructed with quality components, the RB-1572 features a toroidal transformer, ensuring low noise and high stability during operation. The amplifier also employs high-grade capacitors for improved power delivery and overall sound quality. The chassis is designed for optimal heat dissipation, ensuring long-term reliability without compromising audio performance.

Connectivity options abound with the RB-1572, including both XLR balanced and RCA unbalanced inputs, allowing for flexible integration into various audio systems. The linkage capability via trigger input and output ensures synchronization with other Rotel components, making it easy to build a cohesive audio setup.

User-friendly features such as a front-panel power button and an LED status indicator enhance the overall usability of the amplifier. Its sleek and elegant design makes it a visually appealing addition to any audio system, fitting seamlessly into modern home entertainment setups.

In conclusion, the Rotel RB-1572 is a well-engineered power amplifier, combining exceptional sound quality with high-performance specifications. Its cutting-edge technologies and robust build make it an attractive option for audio enthusiasts desiring a refined listening experience while maintaining value and reliability in their audio equipment.