
Volume 9: Managing the Blue Coat SG Appliance
Table
Voltage | Critical: | |
Bus Voltage | Critical | |
CPU voltage | ||
Power Supply voltage | ||
| ||
| Warning: | |
| ||
| ||
|
| |
ADN Connection Status | OK: | |
| Connected | |
| Connecting | |
| Connection Approved | |
| Disabled | |
| Not Operational | |
| Warning: | |
| Approval Pending | |
| Mismatching Approval Status | |
| Partially Connected | |
| Critical: | |
| Not Connected | |
| Connection Rejected | |
| See Volume 5: Advanced Networking for | |
| more information about the ADN | |
| metrics. | |
|
| |
ADN Manager Status | OK: | |
| No Approvals Pending | |
| Not Applicable | |
| Warning: | |
| Approvals Pending | |
|
|
Changing Threshold and Notification Properties
The health monitoring threshold and notification properties are set by default. Use the following procedure to modify the current settings.
To change the threshold and notification properties:
1.Select Maintenance > Health Monitoring.
2.Do one of the following:
•To change the system resource metrics, select General.
•To change the hardware/environmental/ADN metrics, select Status.
Note: You cannot change the threshold values for metrics in the Status tab.
• To change the licensing metrics, select Licensing.
3.Select the metric you want to modify.
28