Roland MMP-2 owner manual Settings for Digital Connections

Page 5

Contents

Settings for Digital Connections	26
Sampling Clock Source	26
Sampling Frequency	26
Audio Input Source	26
Display Messages	26
Examples of Use	27
Analog Input to Analog Output	27
Analog Input to Digital Output	27
Other Features	28
Channel Linking	28
Copying Settings Between Channels	28
Backup Patch	28
Route	29
Initializing	29
Use of computer and setup	30
Set up (PC setting and Install)	30
MMP-2 settings	30
Computer settings	30
Functions work in conjunction with computers	41
Backup Patches	41
Intuitive operation of MMP-2 using MMP-2 editor	41
Trouble Shooting	42
Trouble Shooting about Computer	43
Windows users	43
Macintosh users	44
MIDI Implementation	46
TRANSMITTED DATA AND REGOGNIZED RECEIVE DATA	46
Channel Voice message	46
System Exclusive Message	46
Data Transfer Address Map	47
Parameter Address Block	47
Appendices	51
Specifications	53
Index	54

5

Image 5

Contents Copyright 2002 Roland Corporation Page Using the Unit Safely Contents Settings for Digital Connections Placement Power SupplyMaintenance Additional PrecautionsCopyright Handling CD-ROMsChecking the Included Items Main FeaturesGetting Started Top Panel Top and Rear PanelsRear Panel Pad Sens Function Organization and Signal FlowEqualizer DynamicsGetting Ready to Switch on the Power Set Up and Basic OperationsConnecting the Power Source Making the ConnectionsTurning On the Power Setting the Output LevelConnecting the Input Device Connecting the Output EquipmentGlobal Functions Adjusting the Contrast of the LCD Screen LcdcntPatches Save pressing Enter buttonSaving a Patch Store Patch Resetting Effect Parameters ResetPatch Selection Select Edit Channel Select Edit CH Select MetersInput Dynamics CMP / EXPPeak Indicator Settings for the Analog InputsPhantom Power +48V PadPhase Turning Off the PowerLow-cut Filter LO-CUT Attenuator ATTMic Modeling Using EffectsMic Modeling OFF/ON Model Reference Microphone InputEqualizer Compressor DynamicsGain Gain Filter Type TypeKey In Channel KEY Compressor Type TypeThreshold Thresh Ratio RatioEnhancer/De-esser ExpanderPre-amp Modeling Plug-in EffectHarmonic BrightSampling Clock Source Settings for Digital ConnectionsSampling Frequency Audio Input SourceAnalog Input to Digital Output Examples of UseAnalog Input to Analog Output Copying Settings Between Channels Other FeaturesBackup Patch Channel LinkingInitializing RouteSet up PC setting and Install Use of computer and setupMMP-2 settings Computer settingsWindows Me Use the following procedure to install the MMP-2 driverDeleting the MMP-2 Driver WindowsUse of computer and setup Use the USB cable to connect the MMP-2 and your computer Macintosh / OMS Installing the MMP-2 DriverOMS settings USB connector USB cableUse of computer and setup Macintosh / FreeMIDI FreeMIDI settings About Quick Setup dialog box will appear. Click Continue Functions work in conjunction with computers Backup PatchesIntuitive operation of MMP-2 using MMP-2 editor Symptom Cause Remedy Trouble ShootingAnother patch Resetting Effect Parameters MMP-2 settings pWindows users Trouble Shooting about ComputerMacintosh users Cannot make USB connections correctly MMP-2 does not recover correctly from sleep modeMacintosh hangs up Was the MMP-2 recognized?Transmitted Data Midi ImplementationData Transfer Address Map Algorithm 1 MIC Modeling + Dynamics + Plug INPreamp Status Bulk Data Appendices Midi Implementation Chart Specifications Index SymbolsWindows Memo Memo Information Important Safety Instructions 02897523 ’02-2-E2-21KS About Input Jacks Limitations and Conditions of Condenser Microphone