Roland MMP-2 owner manual Top and Rear Panels, Top Panel

Top and Rear Panels

Top Panel

51	2 6 3		45	Top
7				and Rear Panels
8
9
10
11
12
13 14	15	16	17

1.[METER] Button

This changes the meter display. (p. 16)

2.[PATCH] Button

This performs Select, Store, and Reset operations for patches. (p. 14)

3.[SYSTEM] Button

This accesses Clock, USB, and other functions. (“Sampling Clock Source” (p. 26), “MMP-2 settings” (p. 30)) You can also adjust the contrast of the LCD screen by holding down [SYSTEM] and turning the right Value control. (p. 14)

4.[ENTER] Button

This confirms operations.

You also use this when you want to save a change right away. (“Save pressing [ENTER] button” (p. 14))

5.[PAGE] Buttons

These scroll the screen a page at a time.

6.Value Controls

These edit parameter values. The items shown on the display correspond to the controls below the screen. These are the left, center, and right Value controls.

7.[MIC IN] Jacks

These are balanced XLR/phone input jacks. (p. 13)

8.[PAD] Switches

Pressing one of these attenuates the signal input to the corresponding MIC IN jack by 20 dB. (p. 17)

9.[SENS] Controls

9