Roland MMP-2 owner manual Handling CD-ROMs, Copyright

Page 7

IMPORTANT NOTES

Use a cable from Roland to make the connection. If using some other make of connection cable, please note the following precautions.

Some connection cables contain resistors. Do not use cables that incorporate resistors for connecting to this unit. The use of such cables can cause the sound level to be extremely low, or impossible to hear. For information on cable specifications, contact the manufacturer of the cable.

Before you open the included CD-ROM, you must read the “license agreement.” Opening the CD-ROM will be taken to mean your acceptance of the license agreement.

Handling CD-ROMs

Avoid touching or scratching the shiny underside (encoded surface) of the disc. Damaged or dirty CD- ROM discs may not be read properly. Keep your discs clean using a commercially available CD cleaner.

Copyright

When exchanging audio signals through a digital connection with an external instrument, this unit can perform recording without being subject to the restrictions of the Serial Copy Management System (SCMS). This is because the unit is intended solely for musical production, and is designed not to be subject to restrictions as long as it is used to record works (such as your own compositions) that do not infringe on the copyrights of others. (SCMS is a feature that prohibits second-generation and later copying through a digital connection. It is built into MD recorders and other consumer digital-audio equipment as a copyright-protection feature.)

Do not use this unit for purposes that could infringe on a copyright held by a third party. We assume no responsibility whatsoever with regard to any infringements of third-party copyrights arising through your use of this unit.

•Microsoft and Windows are registered trademarks of Microsoft Corporation.

•Windows® 98 is known officially as: “Microsoft® Windows® 98 operating system.”

•Screen shots in this documents are reprinted with permission from Microsoft Corporation.

•Windows® 2000 is known officially as: “Microsoft® Windows® 2000 operating system.”

•Windows® Me is known officially as: “Microsoft® Windows® Millennium Edition operating system.”

•Macintosh are registered trademark of Apple Computer, Inc.

•MacOS is a trademark of Apple Computer, Inc.

•Pentium is a registered trademark of Intel Corporation.

•MMX is a trademark of Intel Corporation.

•OMS is a registered trademark of Opcode Systems, Inc.

•FreeMIDI is a trademark of Mark of the Unicorn, Inc.

•All product names mentioned in this document are trademarks or registered trademarks of their respective owners.

7

Image 7
Contents Copyright 2002 Roland Corporation Page Using the Unit Safely Contents Settings for Digital Connections Additional Precautions Power SupplyPlacement MaintenanceCopyright Handling CD-ROMsGetting Started Main FeaturesChecking the Included Items Top Panel Top and Rear PanelsRear Panel Dynamics Function Organization and Signal FlowPad Sens EqualizerMaking the Connections Set Up and Basic OperationsGetting Ready to Switch on the Power Connecting the Power SourceConnecting the Output Equipment Setting the Output LevelTurning On the Power Connecting the Input DeviceSave pressing Enter button Adjusting the Contrast of the LCD Screen LcdcntGlobal Functions PatchesPatch Selection Select Resetting Effect Parameters ResetSaving a Patch Store Patch Dynamics CMP / EXP MetersEdit Channel Select Edit CH Select InputPad Settings for the Analog InputsPeak Indicator Phantom Power +48VAttenuator ATT Turning Off the PowerPhase Low-cut Filter LO-CUTReference Microphone Input Using EffectsMic Modeling Mic Modeling OFF/ON ModelEqualizer Filter Type Type DynamicsCompressor Gain GainRatio Ratio Compressor Type TypeKey In Channel KEY Threshold ThreshEnhancer/De-esser ExpanderPre-amp Modeling Plug-in EffectHarmonic BrightAudio Input Source Settings for Digital ConnectionsSampling Clock Source Sampling FrequencyAnalog Input to Analog Output Examples of UseAnalog Input to Digital Output Channel Linking Other FeaturesCopying Settings Between Channels Backup PatchInitializing RouteComputer settings Use of computer and setupSet up PC setting and Install MMP-2 settingsWindows Me Use the following procedure to install the MMP-2 driverDeleting the MMP-2 Driver WindowsUse of computer and setup Use the USB cable to connect the MMP-2 and your computer Macintosh / OMS Installing the MMP-2 DriverOMS settings USB connector USB cableUse of computer and setup Macintosh / FreeMIDI FreeMIDI settings About Quick Setup dialog box will appear. Click Continue Intuitive operation of MMP-2 using MMP-2 editor Backup PatchesFunctions work in conjunction with computers MMP-2 settings p Trouble ShootingSymptom Cause Remedy Another patch Resetting Effect ParametersWindows users Trouble Shooting about ComputerMacintosh users Was the MMP-2 recognized? MMP-2 does not recover correctly from sleep modeCannot make USB connections correctly Macintosh hangs upTransmitted Data Midi ImplementationData Transfer Address Map Algorithm 1 MIC Modeling + Dynamics + Plug INPreamp Status Bulk Data Appendices Midi Implementation Chart Specifications Index SymbolsWindows Memo Memo Information Important Safety Instructions 02897523 ’02-2-E2-21KS About Input Jacks Limitations and Conditions of Condenser Microphone