Roland MMP-2 owner manual USB connector USB cable, OMS settings

Page 36

Use of computer and setup

1.In the “MMP-2 Driver E” folder of the CD-ROM, double-click the “MMP-2 OMS Driver-E Installer” icon.

2.Make sure that OMS is already installed in the location where the driver will be installed, and click [Install].

3.If the following message appears, click [Continue] and all other currently-running applications will be exited, and installation will continue.

4.When installation is completed, the following dialog box will appear. Click [Restart] to restart your Macintosh.

OMS settings

1.Use the USB cable to connect the MMP-2 and your computer.

MMP-2

USB connector

USB cable

2.After completing the connections between the MMP-2 and your computer, turn on your computer and start up Mac OS, and then turn on the MMP-2.

*Once the connections have been completed, turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and the other devices.

3.In the “Opcode” folder in the location where OMS is installed, open the “OMS Applications” folder, and double-click the “OMS Setup” icon.

36

Image 36

Contents Copyright 2002 Roland Corporation Page Using the Unit Safely Contents Settings for Digital Connections Power Supply PlacementMaintenance Additional PrecautionsHandling CD-ROMs CopyrightMain Features Getting StartedChecking the Included Items Top and Rear Panels Top PanelRear Panel Function Organization and Signal Flow Pad SensEqualizer DynamicsSet Up and Basic Operations Getting Ready to Switch on the PowerConnecting the Power Source Making the ConnectionsSetting the Output Level Turning On the PowerConnecting the Input Device Connecting the Output EquipmentAdjusting the Contrast of the LCD Screen Lcdcnt Global FunctionsPatches Save pressing Enter buttonResetting Effect Parameters Reset Patch Selection SelectSaving a Patch Store Patch Meters Edit Channel Select Edit CH SelectInput Dynamics CMP / EXPSettings for the Analog Inputs Peak IndicatorPhantom Power +48V PadTurning Off the Power PhaseLow-cut Filter LO-CUT Attenuator ATTUsing Effects Mic ModelingMic Modeling OFF/ON Model Reference Microphone InputEqualizer Dynamics CompressorGain Gain Filter Type TypeCompressor Type Type Key In Channel KEYThreshold Thresh Ratio RatioExpander Enhancer/De-esserPlug-in Effect Pre-amp ModelingBright HarmonicSettings for Digital Connections Sampling Clock SourceSampling Frequency Audio Input SourceExamples of Use Analog Input to Analog OutputAnalog Input to Digital Output Other Features Copying Settings Between ChannelsBackup Patch Channel LinkingRoute InitializingUse of computer and setup Set up PC setting and InstallMMP-2 settings Computer settingsUse the following procedure to install the MMP-2 driver Windows MeWindows Deleting the MMP-2 DriverUse of computer and setup Use the USB cable to connect the MMP-2 and your computer Installing the MMP-2 Driver Macintosh / OMSUSB connector USB cable OMS settingsUse of computer and setup Macintosh / FreeMIDI FreeMIDI settings About Quick Setup dialog box will appear. Click Continue Backup Patches Intuitive operation of MMP-2 using MMP-2 editorFunctions work in conjunction with computers Trouble Shooting Symptom Cause RemedyAnother patch Resetting Effect Parameters MMP-2 settings pTrouble Shooting about Computer Windows usersMacintosh users MMP-2 does not recover correctly from sleep mode Cannot make USB connections correctlyMacintosh hangs up Was the MMP-2 recognized?Midi Implementation Transmitted DataData Transfer Address Map Algorithm 1 MIC Modeling + Dynamics + Plug INPreamp Status Bulk Data Appendices Midi Implementation Chart Specifications Symbols IndexWindows Memo Memo Information Important Safety Instructions 02897523 ’02-2-E2-21KS Limitations and Conditions of Condenser Microphone About Input Jacks