Basic Setup | HDC II Programming Guide |
SET DEX OPTIONS (DEX MODE ONLY)
1.Follow the steps in "Gain Access To The Supervisor Mode", PAGE 7.
2. Press | , then | until the display shows one of two resettable |
bill validator totals transmitted to the DEX device:
|
|
|
| - the value of bills in the stacker will be transmitted in a | ||
| cashCA304format=. For example: 200 for two dollars. (This is the default setting.) | |||||
|
|
|
| - the value of bills in the stacker will be transmitted in a dol- | ||
| lar count format. For example: 2 for two dollars. |
| ||||
3. | Press |
|
| to switch between the two choices. Consult your DEX hand- | ||
| ||||||
| ||||||
| held supplier for the proper settings for your machine. |
| ||||
|
|
|
|
| NOTE |
|
| If your bill count is incorrect, the CA304 setting may be |
| ||||
|
|
|
|
| wrong. Try using the other setting. |
|
4. | Press | until the display shows one of the following two date/time | ||||
| options: |
|
|
| ||
|
|
|
| - the DEX device will transmit the date and time of the last | ||
| vend for each selection. |
| ||||
| LAST.VND.O |
| - OR - |
| ||
|
|
|
| N.C.- the DEX device will NOT transmit the date and time of the | ||
| last vend for each selection. (This is the default setting) |
| ||||
5. | Press |
|
| N.Oto. | switch between the two choices. |
|
|
| |||||
|
| |||||
6. | CONTINUE.N |
|
| |||
6730018 |
|
| FF | 11 | July, 2003 | |
|
|
|
|
|
|