View Machine Data | HDC II Programming Guide | ||
| VIEW CUP RING CYCLES RELATED TO SUREVEND™ | ||
| (NOT SHOWN IF ZERO) |
| |
1. Press | , then press | until the display shows | . XX |
represents the number of vends during which more than one ring cycle was required to successfully dispense a cup.
3.CONTINUE.
VIEW TIMES NO CUP WAS DETECTED AFTER A CUP RING CYCLED
(NOT SHOWN IF ZERO)
1. | Press | , then press | until the display shows |
| . XX | |
| represents the number of times a cup was not detected after ring 1 cycled. | |||||
| Check the cup ring adjustment (see the Operator’s Guide), or the cup stack | |||||
| for damage if the count is excessive. |
| SV.TOT | XX | ||
2. | Press | to clear the count. |
|
| ||
3. | Press | until the display shows | . XX represents the num- | |||
| ber of times a cup was not detected after ring 2 cycled. Check the cup ring | |||||
| adjustment (see the Operator’s Guide), or the cup stack for damage if the | |||||
| count is excessive. |
|
| SV.FL1 | XX | |
|
|
|
|
|
4.CONTINUE.
VIEW HOME SWITCH USAGE RELATED TO
1. | Press | , then press | until the display shows | . XX | |
| represents the number of times home switches were used due to | ||||
| ’ |
| selected but not working. | WO.SVXXJuly, 2003 | |
6730018OPTNSURE.V |
| 63 SV.FL2XX | |||
2. | CONTINUE |
|
|
|
|