HDC II Programming Guide | Monetary Setup | ||||
2. | Press | until one of the following is displayed: | |||
3. | < |
|
| ||
| able change. Hold the last bill which meets or exceeds maximum price in | ||||
| escrow. (This setting is normally used.) | ||||
|
|
|
|
| - OR - |
4. | ACC | ||||
| able change. Immediately stack the last bill. | ||||
| Example: If setting is | and maximum price is $1.50. This | |||
| setting will immediately stack the second $1.00 bill inserted. | ||||
5. | Press |
|
| to display the desired choice. | |
| |||||
| |||||
6. | The value of " | " has two purposes: |
a. | The value of " | " tells the machine how big a bill or coin to accept | |||
| even though there is not enough change in the coin mech to cover all | ||||
| possible paybacks. |
|
| ||
| For example, enter 1.00. Therefore, the machine will take a dollar bill | ||||
| or coin even though there is less than $1.00's worth of change. Entering | ||||
| 5.00 tells the machine to take a five even though there is less than | ||||
| $5.00's worth of change, and so forth. |
| |||
| =$$X. |
|
| NOTE |
|
| This could cause a customer to be |
| |||
| Entering 0.00 means that bills or coins not held in escrow or in a tube | ||||
| will only be accepted if there is enough change to cover them. |
| |||
b. | The.STKvalueX.XXof " |
| " tells the machine how much the customer is allowed | ||
| to overbuy a product. The customer will be | ||||
| overbuy occurs Example:ACC.STK1.00 |
| |||
| For a value of $0.25: if there is no change in the machine and the cus- | ||||
| tomer inserts a $1.00 bill. The customer can purchase a product for | ||||
| $0.75 even though the change cannot be paid back. The customer will | ||||
| be | ||||
| change canX.XXbe paid. |
|
| ||
|
| X.XX |
|
| |
| Entering 0.00 means that the vend will only be approved when the cor- | ||||
| rect change can be returned (overbuy disabled). |
| |||
|
| X.XX |
|
|
|
July, 2003 |
|
|
| 16 | 6730018 |