Monetary Setup | HDC II Programming Guide | |
| SELECT CARD READER | |
1. Press | , then press | until the current card reader is shown in |
the display. Press
to choose the desired card reader.
2. | Your choices are: | , | , or | . |
3. | Proceed to SELECT MONETARY OPTIONS, page 15, to customize | |||
| your card reader choice. |
|
|
|
|
|
| NOTE |
|
| Depending upon your choice of card reader, some displays | |||
|
| may not appear. |
| |
4. | CONTINUE. |
|
|
|
represents theNOlargestCARDDUMBdenominationCARDcoin orMDBbill thatCARDwill be changed without a purchase. Any
SELECT MONETARY OPTIONS
Certain options can be selected, depending upon which monetary devices you have selected.
This function lets you: |
|
| |
• Set change returning criteria | • | Set overbuy options | |
• | Set declining balance | • Set last bill stacking options | |
• | Set currency acceptance on low | • | Set card reader revalue options |
change |
|
|
|
1. Press | , then press | until the display shows | . |
(Each coin denomination for which the coin mech has a tube is called an ESCROWED coin because it can be returned.) When the coin return button is pressed, all coins inserted will be returned provided there is a coin mech tube for each of those coins, EXCEPT in the forced vend mode.
Some examples: |
|
|
| |
| - | Forced vend; NO change returned without a purchase. | ||
125 | - | Returns change without purchase if all accepted coins are | ||
| less than .25 denomination or have a payout tube. Accep- | |||
|
| |||
|
| tance of a dollar coin will not cause a Force Vend if the | ||
|
| coin mechanism has a dollar coin payout tube. Otherwise, | ||
|
| accepting a dollar coin or accepting and stacking of a dol- | ||
|
| lar bill will cause a Force Vend. |
| |
| - | Bills and | ||
|
| will be changed without purchase. All escrowed coins | ||
6730018CHANGE.X.XX000 |
| are returned. |
| CHANGEJuly,X.XX2003 |
|
| 15 |